I wrote: > DRAC's MAC address - the host interface MAC addresses are usually numerically > just before
Jefferson Ogata replied: > I believe that's true for BMCs, but not generally for DRACs If the DRAC is configured to use the dedicated NIC port, the MAC address correlation would not hold. Any DRAC that uses a shared NIC port should have a correlated MAC address, though. Older DRAC cards will not support this, but it is available on DRAC 5 and later. You can set the shared/dedicated selection from the DRAC web GUI (System -> Configuration -> Network; attribute "NIC selection") or via racadm config -g cfgLanNetworking -o cfgNicSelection. Of course, if the DRAC is only physically connected via the dedicated NIC port, it would probably be difficult to get the MAC address of the shared NIC port. @alex -- mailto:[email protected] _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq
