Hey everyone, I am in the process of setting up a perc6e with a md1120 and came across the option in the raid controller for PD per span. I am unable to configure all 24 disks into a single raid 10 array with a setting of 2 PD per span, and must set it to 4. I am guessing this is because the Perc6E limits us to 8 spans per virtual disk.
I have been unable to find any information on how the controller treats the disks in a span? Tim Krieger ________________________________ This electronic mail transmission and any accompanying attachments contain confidential information intended only for the use of the individual or entity named above. Any dissemination, distribution, copying or action taken in reliance on the contents of this communication by anyone other than the intended recipient is strictly prohibited. If you have received this communication in error please immediately delete the e-mail and either notify the sender at the above e-mail address or by telephone at +1 250.386.5323.
_______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq
