There is an option to increase the number of disks in the span. I currently have a MD1120 with 24 disks. I have 4 disks per span. This has proven to be functional for me.
- Aaron Fraser On Dec 3, 2009, at 11:38 AM, Tim Krieger wrote: > Hey everyone, > > I am in the process of setting up a perc6e with a md1120 and came across the > option in the raid controller for PD per span. I am unable to configure all > 24 disks into a single raid 10 array with a setting of 2 PD per span, and > must set it to 4. I am guessing this is because the Perc6E limits us to 8 > spans per virtual disk. > > I have been unable to find any information on how the controller treats the > disks in a span? > > Tim Krieger > > > This electronic mail transmission and any accompanying attachments contain > confidential information intended only for the use of the individual or > entity named above. Any dissemination, distribution, copying or action taken > in reliance on the contents of this communication by anyone other than the > intended recipient is strictly prohibited. If you have received this > communication in error please immediately delete the e-mail and either notify > the sender at the above e-mail address or by telephone at +1 250.386.5323. > _______________________________________________ > Linux-PowerEdge mailing list > [email protected] > https://lists.us.dell.com/mailman/listinfo/linux-poweredge > Please read the FAQ at http://lists.us.dell.com/faq
_______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq
