I have the "No controllers found" on one PE1850 with Perc4e/Si as well. The server runs CentOS 5.4. I have another server with identical hardware and OS, and there it works after the update to 6.2
/Johan -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Giuseppe Tanzilli - ServerPlan Sent: den 17 december 2009 12:23 To: [email protected] Subject: Re: [official] OpenManage 6.2 yum repository posted Hi, same issue here with OMSA 6.2 not detecting PERC anymore on PE2950, I tried restarting OMSA services and rebooting, but the issue persists. I have many 2950 with this issue after the nightly update. Same issue on PowerEdge R410 Thanks a lot, Giuseppe Il 17/12/2009 8.45, Dirk Gfroerer ha scritto: > Hi, > > after upgrading a PowerEdge 840 with a SAS 5i/R (Centos 5.4) and a T300 > with a PERC 6/i (RHEL 5.4) the storage controllers on both machines are > no longer accessible through OMSA. "omreport storage controller" lists > "No controllers found". Everything has been working fine with OMSA 6.1. > > Am I the only one or did anyone else lose access to the storage controllers? > > Thanks& Kind Regards, > Dirk > > _______________________________________________ > Linux-PowerEdge mailing list > [email protected] > https://lists.us.dell.com/mailman/listinfo/linux-poweredge > Please read the FAQ at http://lists.us.dell.com/faq > _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq
