should be option raidctrl ./pediags raidctrl --run quicktest=true > results.txt
see f.e. http://www.tbaumi.de/blog/?p=186 regards -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Robin Bowes Sent: Donnerstag, 28. Januar 2010 18:03 To: linux-poweredge-Lists Subject: pediags not finding PERC6/i controller or disks Hi, I'm running pediags under CentOS 5.4 x86_64 on an R410 with a Perc6/i controller and 4 x SAS disks but it doesn't find them: [r...@b034 ~]# cd /opt/dell/pediags/oldiags/bin [r...@b034 bin]# ./pediags sasdevdiag --show The device class requested is not present/enumerated. Other classes work OK, eg. "network": [r...@b034 bin]# ./pediags network --show Device Index : 1 Device Name : NetXtreme II BCM5716 Gigabit Ethernet Description : NetXtreme II BCM5716 Gigabit Ethernet Device Class : Network Controller Device Status : Device is working properly. Device Location : PCI Bus 1, Device 0, Function 0 Additional H/W Info : Embedded etc. Is this a known issue, or am I likely missing some deps? R. _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq
