You can refer to the "Storage Management User's Guide" ( http://support.dell.com/support/edocs/software/svradmin/6.2/en/OMSS/inde x.htm ) to know the possible values.
e.g., to find the possible states and properties of an Virtual Disk you can find under the "Virtual Disk Properties" section (http://support.dell.com/support/edocs/software/svradmin/6.2/en/OMSS/vdm gmt.htm#wp1424964 )of the user guide. Thanks, Mohan -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Giulio Sent: Saturday, March 20, 2010 3:19 AM To: linux-poweredge-Lists Subject: omreport storage: are all possible output values documented? OMSA 6.2 I'm interested in finding docs which will explain in detail all the possible output values of the "omreport storage controller" and related commands. For instance, on one of my systems "omreport storage vdisk" will output ... ... State : Ready Progress : Not Applicable .. Which other values can "State:" show? "Progress:"? The reason is to be able to use omreport's output in scripts. I looked here http://support.dell.com/support/edocs/software/svradmin/6.2/en/CLI/html/ storage.htm#wp1077100 but coulnd't find a definitive reference. Thanks -- [email protected] _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq
