On Mon, Mar 22, 2010 at 06:20, <[email protected]> wrote: > e.g., to find the possible states and properties of an Virtual Disk you > can find under the "Virtual Disk Properties" section > (http://support.dell.com/support/edocs/software/svradmin/6.2/en/OMSS/vdm > gmt.htm#wp1424964 )of the user guide.
Unfortunately this is more geared towards the GUI front-end. For instance, for the "status" the table says "Warning/non-critical", but I think in the omreport output I might see either "Warning" or "non-critical" but not "Warning/non-critical", right? I downloaded the script Ben pointed to, and that contains a reference of possible values. The problem now is that I tested OMSA 5.5.0, 6.1.0, 6.2.0 and the position of the columns using "-fmt ssv" keeps changing, the names of the columns do the same (ie: "Type" -> "Bus Protocol"); ideally this could be documented too, but this I can easily test by running omreport once for every OMSA version and checking the differences. Thanks -- [email protected] _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq
