hello, a blade M910 with RH EL 5.5 x86_64 and 6.2 agents. Installed these: libsmbios-2.2.19-10.1.el5.i386.rpm libsmbios-2.2.19-10.1.el5.x86_64.rpm RPM-GPG-KEY-dell RPM-GPG-KEY-libsmbios smbios-utils-bin-2.2.19-10.1.el5.x86_64.rpm srvadmin-cm-6.2.0-677.i386.rpm srvadmin-deng-6.2.0-1.6.el5.i386.rpm srvadmin-fsa-6.2.0-1.6.el3.i386.rpm srvadmin-hapi-6.2.0-1.17.el5.i386.rpm srvadmin-isvc-6.2.0-1.16.el5.i386.rpm srvadmin-megalib-6.2.0-1.6.el3.i386.rpm srvadmin-omacore-6.2.0-1.18.el5.i386.rpm srvadmin-omcommon-6.2.0-1.19.el5.i386.rpm srvadmin-omilcore-6.2.0-1.9.el5.noarch.rpm srvadmin-smcommon-6.2.0-1.29.el5.i386.rpm srvadmin-storage-6.2.0-1.29.el5.i386.rpm srvadmin-storage-populator-6.2.0-1.25.el3.i386.rpm srvadmin-storelib-6.2.0-1.11.el3.i386.rpm srvadmin-storelib-libpci-6.2.0-1.1.el5.i386.rpm srvadmin-storelib-sysfs-6.2.0-1.1.el5.i386.rpm srvadmin-sysfsutils-6.2.0-2.1.el5.i386.rpm srvadmin-xmlsup-6.2.0-1.17.el5.i386.rpm
I have this strange output when querying the controller status; state is degraded, but OK... # omreport storage controller Controller PERC H200 Integrated Modular (Embedded) Controllers ID : 0 Status : Non-Critical Name : PERC H200 Integrated Modular Slot ID : Embedded State : Degraded Firmware Version : 07.01.33.00 Minimum Required Firmware Version : Not Applicable Driver Version : 01.101.06.00 Minimum Required Driver Version : 02.00.00.00 Storport Driver Version : Not Applicable Minimum Required Storport Driver Version : Not Applicable Number of Connectors : 1 Rebuild Rate : 50% BGI Rate : 50% Check Consistency Rate : 50% Reconstruct Rate : Not Applicable Alarm State : Not Applicable Cluster Mode : Not Applicable SCSI Initiator ID : Not Applicable Cache Memory Size : Not Applicable Patrol Read Mode : Not Applicable Patrol Read State : Not Applicable Patrol Read Rate : Not Applicable Patrol Read Iterations : Not Applicable Abort check consistency on error : Not Applicable Allow Revertible Hot Spare and Replace Member : Not Applicable Auto replace member on predictive failure : Not Applicable Load balance : Not Applicable Security Capable : Not Applicable Security Key Present : Not Applicable Redundant Path view : Not Applicable using check_openmanage from http://folk.uio.no/trondham/software/check_openmanage.html with these options /usr/lib64/nagios/plugins/check_openmanage -o 0 --blacklist ctrl_driver=0/ctrl_stdr=0 -d System: PowerEdge M910 ServiceTag: OMSA version: 6.2.0 BIOS/date: 1.1.7 05/25/2010 Plugin version: 3.5.10 ----------------------------------------------------------------------------- Storage Components ============================================================================= STATE | ID | MESSAGE TEXT ---------+----------+-------------------------------------------------------- OK | 0 | Controller 0 [PERC H200 Integrated Modular] is Degraded OK | 0:0:0:0 | Physical Disk 0:0:0 [SAS-HDD 146GB] on ctrl 0 is Online OK | 0:0:0:1 | Physical Disk 0:0:1 [SAS-HDD 146GB] on ctrl 0 is Online OK | 0:0 | Logical Drive '/dev/sda' [RAID-1, 136.13 GB] is Ready OK | 0:0 | Connector 0 [SAS Port RAID Mode] on controller 0 is Ready OK | 0:0:0 | Enclosure 0:0:0 [Backplane] on controller 0 is Ready ----------------------------------------------------------------------------- .... In general the standard check (without -d but with the blacklist option, as the driver release in RH EL 5 is a little behind the reccomended..) returns ok. So the question is is it ok or not? Entering directly into BIOS for the controller (Ctrl-C) gives Optimal as state.... Is this a bug related with the text output....? Thanks, Gianluca
_______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq
