Hi List,
I've been reading about the smartctl problems people have been having. I
couldn't see my controller listed in any of the threads. OS is RHEL5.4
smartmontools is smartmontools-5.38-2.el5
lsmod | grep mpt
mptctl 64073 2
mptbase 117765 1 mptctl
scsi_mod 196697 14
mptctl,ib_iser,iscsi_tcp,bnx2i,cxgb3i,libiscsi2,scsi_transport_iscsi2,scsi_dh,sr_mod,libata,usb_storage,sg,megaraid_sas,sd_mod
lspci -vv ..
0f:0e.0 RAID bus controller: Dell PowerEdge Expandable RAID controller 5
Subsystem: Dell PERC 5/E Adapter RAID Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr+ Stepping+ SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
>TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (32000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 90
Region 0: Memory at f80f0000 (32-bit, prefetchable) [size=64K]
Region 2: Memory at de5c0000 (32-bit, non-prefetchable) [size=128K]
Expansion ROM at de400000 [disabled] [size=32K]
Capabilities: <access denied>
I'm looking to check a disk which is now a hot spare but may have failed
previously so I'd like to know whether is has any failing blocks.
smartctl -a -d megaraid,1 /dev/sdd
g.
_______________________________________________
Linux-PowerEdge mailing list
[email protected]
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq
