The version of smartmontools that comes with RHEL5 doesn't have support for the megaraid. You'll need to upgrade to at least 5.39.1 or newer.
I have an RPM built for RHEL5 for smartmontools 5.39.1 if you want it I can email it to you. -Bond On Thu, 2010-07-29 at 17:17 +0100, [email protected] wrote: > Hi List, > > I've been reading about the smartctl problems people have been having. I > couldn't see my controller listed in any of the threads. OS is RHEL5.4 > smartmontools is smartmontools-5.38-2.el5 > > lsmod | grep mpt > mptctl 64073 2 > mptbase 117765 1 mptctl > scsi_mod 196697 14 > mptctl,ib_iser,iscsi_tcp,bnx2i,cxgb3i,libiscsi2,scsi_transport_iscsi2,scsi_dh,sr_mod,libata,usb_storage,sg,megaraid_sas,sd_mod > > lspci -vv .. > > 0f:0e.0 RAID bus controller: Dell PowerEdge Expandable RAID controller 5 > Subsystem: Dell PERC 5/E Adapter RAID Controller > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- > ParErr+ Stepping+ SERR+ FastB2B- > Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium > >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 (32000ns min), Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 90 > Region 0: Memory at f80f0000 (32-bit, prefetchable) [size=64K] > Region 2: Memory at de5c0000 (32-bit, non-prefetchable) [size=128K] > Expansion ROM at de400000 [disabled] [size=32K] > Capabilities: <access denied> > > I'm looking to check a disk which is now a hot spare but may have failed > previously so I'd like to know whether is has any failing blocks. > > smartctl -a -d megaraid,1 /dev/sdd > > > g. > > _______________________________________________ > Linux-PowerEdge mailing list > [email protected] > https://lists.us.dell.com/mailman/listinfo/linux-poweredge > Please read the FAQ at http://lists.us.dell.com/faq _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq
