Karsten Suehring <[email protected]> writes: > Hi, > > I recently installed on two of my Dell Poweredge R410 servers the BMC > firmware version 1.54. > Now the check_openmanage nagios plugin reports: > >> Amperage probe 0 [System Board System Level] is [N/A] > > Does anybody have similar problems? Is it a problem with the firmware or with > check_openmanage? > > The OMSA web interface does not report any problems.
Hi Karsten, Interesting problem.. what does 'omreport chassis pwrmonitoring' say? The output should be something like this: Power Consumption Information Power Consumption Index : 2 Status : Ok Probe Name : System Board System Level Reading : 161 W Warning Threshold : 917 W Failure Threshold : 966 W [...etc...] If the output from the command above is normal, the issue is probably with OMSA and/or SNMP. Try restarting OMSA and the SNMP daemon. (I'm guessing that you're checking via SNMP.) If the reading is not available via SNMP, the plugin will set the reading manually to '[N/A]'. Regards, -- Trond H. Amundsen <[email protected]> Center for Information Technology Services, University of Oslo _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq
