hi all,
I run into the following problem while I try to update a dell server.
OS: CentOs 5.5
Omsa 6.3
[r...@amstel-lnx01 ~]# update_firmware --yes
Running system inventory...
Searching storage directory for available BIOS updates...
Checking NetXtreme II BCM5708 Gigabit Ethernet rev 12 (eth1) - 4.0.3
Available: pci_firmware(ven_0x14e4_dev_0x164c) - 5.2.7
Found Update: pci_firmware(ven_0x14e4_dev_0x164c) - 5.2.7
Checking BIOS - 2.3.1
Available: dell_dup_componentid_00159 - 2.6.1
Found Update: dell_dup_componentid_00159 - 2.6.1
Checking System BIOS for PowerEdge 2950 - 2.3.1
Did not find a newer package to install that meets all
installation checks. Checking DRAC 5 Firmware - 1.33
Available: dell_dup_componentid_08735 - 1.51
Found Update: dell_dup_componentid_08735 - 1.51
Checking NetXtreme II BCM5708 Gigabit Ethernet rev 12 (eth0) - 4.0.3
Available: pci_firmware(ven_0x14e4_dev_0x164c) - 5.2.7
Found Update: pci_firmware(ven_0x14e4_dev_0x164c) - 5.2.7
Checking BMC - 2.10
Available: dell_dup_componentid_05814 - 2.37
Found Update: dell_dup_componentid_05814 - 2.37
Found firmware which needs to be updated.
Running updates...
/ Installing
pci_firmware(ven_0x1000_dev_0x0060_subven_0x1028_subdev_ ...Installation
failed for package:
pci_firmware(ven_0x1000_dev_0x0060_subven_0x1028_subdev_0x1f0c) -
6.2.0-0013 aborting update...
Verbose output:
Running updates...
/ Installing
pci_firmware(ven_0x1000_dev_0x0060_subven_0x1028_subdev_ ...hey, we are
supposed to be installing now... :) loading xml
from: /usr/libexec/dell_dup/PERC6_PERC/PIEConfig.xml loaded. Plugin
command is sasdupie -u -f -o update.xml Output file is update.xml
Plugin timeout is 9900
- Installing
pci_firmware(ven_0x1000_dev_0x0060_subven_0x1028_subdev_ ...output from
the cmd was: <?xml version="1.0" encoding="UTF-8"?><SVMExecution
lang="en"><RebootRequired>0</RebootRequired></SVMExecution> \
Installing
pci_firmware(ven_0x1000_dev_0x0060_subven_0x1028_subdev_ ...Could not
determine status None Installation failed for package:
pci_firmware(ven_0x1000_dev_0x0060_subven_0x1028_subdev_0x1f0c) -
6.2.0-0013 aborting update...
The error message from the low-level command was:
Could not determine status
Complete!
Any suggestions are welcome.
Otherwise these updates will come when I'm in Holland again.. ;-)
tnx in advance..
Arno
_______________________________________________
Linux-PowerEdge mailing list
[email protected]
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq
