specs: Dell Poweredge 2950 rev.III BMC v. 2.10 Drac v. 1.33 Bios v. 2.3.1
kernel 2.6.18-92.1.10.el5.centos.plus #1 SMP x86_64 GNU/Linux CentOs 5.5 On Sat, 30 Oct 2010 22:46:12 +0200 Arno van der Veen <[email protected]> wrote: > hi all, > > I run into the following problem while I try to update a dell server. > > OS: CentOs 5.5 > Omsa 6.3 > > > [r...@amstel-lnx01 ~]# update_firmware --yes > > Running system inventory... > > Searching storage directory for available BIOS updates... > Checking NetXtreme II BCM5708 Gigabit Ethernet rev 12 (eth1) - 4.0.3 > Available: pci_firmware(ven_0x14e4_dev_0x164c) - 5.2.7 > Found Update: pci_firmware(ven_0x14e4_dev_0x164c) - 5.2.7 > Checking BIOS - 2.3.1 > Available: dell_dup_componentid_00159 - 2.6.1 > Found Update: dell_dup_componentid_00159 - 2.6.1 > Checking System BIOS for PowerEdge 2950 - 2.3.1 > Did not find a newer package to install that meets all > installation checks. Checking DRAC 5 Firmware - 1.33 > Available: dell_dup_componentid_08735 - 1.51 > Found Update: dell_dup_componentid_08735 - 1.51 > Checking NetXtreme II BCM5708 Gigabit Ethernet rev 12 (eth0) - 4.0.3 > Available: pci_firmware(ven_0x14e4_dev_0x164c) - 5.2.7 > Found Update: pci_firmware(ven_0x14e4_dev_0x164c) - 5.2.7 > Checking BMC - 2.10 > Available: dell_dup_componentid_05814 - 2.37 > Found Update: dell_dup_componentid_05814 - 2.37 > > Found firmware which needs to be updated. > > Running updates... > / Installing > pci_firmware(ven_0x1000_dev_0x0060_subven_0x1028_subdev_ ...Installation > failed for package: > pci_firmware(ven_0x1000_dev_0x0060_subven_0x1028_subdev_0x1f0c) - > 6.2.0-0013 aborting update... > > Verbose output: > > Running updates... > / Installing > pci_firmware(ven_0x1000_dev_0x0060_subven_0x1028_subdev_ ...hey, we > are supposed to be installing now... :) loading xml > from: /usr/libexec/dell_dup/PERC6_PERC/PIEConfig.xml loaded. Plugin > command is sasdupie -u -f -o update.xml Output file is update.xml > Plugin timeout is 9900 > - Installing > pci_firmware(ven_0x1000_dev_0x0060_subven_0x1028_subdev_ ...output > from the cmd was: <?xml version="1.0" encoding="UTF-8"?><SVMExecution > lang="en"><RebootRequired>0</RebootRequired></SVMExecution> \ > Installing > pci_firmware(ven_0x1000_dev_0x0060_subven_0x1028_subdev_ ...Could not > determine status None Installation failed for package: > pci_firmware(ven_0x1000_dev_0x0060_subven_0x1028_subdev_0x1f0c) - > 6.2.0-0013 aborting update... > > The error message from the low-level command was: > > Could not determine status > Complete! > > > Any suggestions are welcome. > Otherwise these updates will come when I'm in Holland again.. ;-) > > tnx in advance.. > > Arno _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq
