Hello all,
I upgraded all firmware manually as written earlier, but I really can't
get the perc6/i upgraded in it's firmware.. :-(
I tried by yum repos --> nope
I tried rpm for perc6 firmware --> nope, same result in output.. :-(
# lspci |grep RAID
01:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS
1078 (rev 04)
below all output:
Running rpm_check_debug
Running Transaction Test
Finished Transaction Test
Transaction Test Succeeded
Running Transaction
Installing :
dell_ie_bios
1/5 Installing :
dell_ie_nic_broadcom
2/5 ln: creating symbolic link
`/usr/libexec/dell_dup//dell_ie_nic_broadcom-1.1.0/UpdRollBack' to
`/usr/libexec/dell_dup/dell_ie_bios/UpdRollBack': File exists
Installing :
PERC_6_i_Integrated_ven_0x1000_dev_0x0060_subven_0x1028_subdev_0x1f0c
3/5 Installing :
BCM5708_Copper_LOM_ven_0x14e4_dev_0x164c
4/5 Installing :
system_bios_PowerEdge_2950
5/5 Config does not specify automatic install during package install.
Please run update_firmware manually to install updates. Config does not
specify automatic install during package install. Please run
update_firmware manually to install updates. Config does not specify
automatic install during package install. Please run update_firmware
manually to install updates.
Installed:
BCM5708_Copper_LOM_ven_0x14e4_dev_0x164c.noarch
0:a10-1
PERC_6_i_Integrated_ven_0x1000_dev_0x0060_subven_0x1028_subdev_0x1f0c.noarch
0:a11-1 system_bios_PowerEdge_2950.noarch
55:2.3.1-20
Dependency Installed:
dell_ie_bios.x86_64 0:2.0.0-1.100.2.el5
dell_ie_nic_broadcom.x86_64 0:1.1.0-2
Complete!
[r...@amstel-lnx01 update]# update_firmware
Running system inventory...
Searching storage directory for available BIOS updates...
Checking NetXtreme II BCM5708 Gigabit Ethernet rev 12 (eth1) - 5.0.13
Available: pci_firmware(ven_0x14e4_dev_0x164c) - 5.2.7
Found Update: pci_firmware(ven_0x14e4_dev_0x164c) - 5.2.7
Checking BIOS - 2.6.1
Did not find a newer package to install that meets all
installation checks. Checking System BIOS for PowerEdge 2950 - 2.6.1
Available: system_bios(ven_0x1028_dev_0x01b2) - 2.3.1
Did not find a newer package to install that meets all
installation checks. Checking NetXtreme II BCM5708 Gigabit Ethernet rev
12 (eth0) - 5.0.13 Available: pci_firmware(ven_0x14e4_dev_0x164c) -
5.2.7 Found Update: pci_firmware(ven_0x14e4_dev_0x164c) - 5.2.7
Found firmware which needs to be updated.
Please run the program with the '--yes' switch to enable BIOS update.
UPDATE NOT COMPLETED!
[r...@amstel-lnx01 update]# update_firmware --yes
Running system inventory...
Searching storage directory for available BIOS updates...
Checking NetXtreme II BCM5708 Gigabit Ethernet rev 12 (eth1) - 5.0.13
Available: pci_firmware(ven_0x14e4_dev_0x164c) - 5.2.7
Found Update: pci_firmware(ven_0x14e4_dev_0x164c) - 5.2.7
Checking BIOS - 2.6.1
Did not find a newer package to install that meets all
installation checks. Checking System BIOS for PowerEdge 2950 - 2.6.1
Available: system_bios(ven_0x1028_dev_0x01b2) - 2.3.1
Did not find a newer package to install that meets all
installation checks. Checking NetXtreme II BCM5708 Gigabit Ethernet rev
12 (eth0) - 5.0.13 Available: pci_firmware(ven_0x14e4_dev_0x164c) -
5.2.7 Found Update: pci_firmware(ven_0x14e4_dev_0x164c) - 5.2.7
Found firmware which needs to be updated.
Running updates...
\ Installing
pci_firmware(ven_0x1000_dev_0x0060_subven_0x1028_subdev_ ...Installation
failed for package:
pci_firmware(ven_0x1000_dev_0x0060_subven_0x1028_subdev_0x1f0c) -
6.2.0-0013 aborting update...
The error message from the low-level command was:
Could not determine status
[r...@amstel-lnx01 update]# tail /var/log/firmware-updates.log
2010-10-31 14:01:22,245: Attempting Firmware Update
2010-10-31 14:01:22,245: Attempted by user: root
2010-10-31 14:01:22,245: Package name:
pci_firmware(ven_0x1000_dev_0x0060_subven_0x1028_subdev_0x1f0c)
2010-10-31 14:01:22,245: Package display name: PERC 6/i Integrated
2010-10-31 14:01:22,245: Package version: 6.2.0-0013 2010-10-31
14:01:22,246: Devices: 2010-10-31 14:01:22,246: Device name:
pci_firmware(ven_0x1000_dev_0x0060_subven_0x1028_subdev_0x1f0c)
2010-10-31 14:01:22,246: Device display name: 01:00.0 RAID bus
controller: LSI Logic / Symbios Logic MegaRAID SAS 1078 (rev 04)
2010-10-31 14:01:22,246: Device version: unknown 2010-10-31
14:01:23,374: Update result: Device update failed.
_______________________________________________
Linux-PowerEdge mailing list
[email protected]
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq
