I'm guessing the 'pdslotreport" option was something added to those newer generation cards.
Nope, according to this community forum post by Peter Wise the pdslotreport command works on H710mini as well. http://en.community.dell.com/techcenter/systems-management/f/4494/t/19471290 The only difference here is that he did not specify the enclosure. omreport storage controller controller=0 info=pdslotreport Stefan On Jan 24, 2017, at 9:49 PM, Russell Kackley <[email protected]<mailto:[email protected]>> wrote: Hi All, I have Dell PE servers with PERC H800, H810, and H830 cards in them. All of them support the 'omreport storage enclosure ... info=pdslotreport" command I'm guessing the 'pdslotreport" option was something added to those newer generation cards. On Tue, Jan 24, 2017 at 2:51 AM, Patrick Boutilier <[email protected]<mailto:[email protected]>> wrote: On 01/24/2017 08:41 AM, Robert Jacobson wrote: Where's the documentation for which controllers support this command? I get "Operation not supported" on my R720xd with PERC H710 Mini: Same error on H700 Integrated and H730 Mini [root@sfep2 ~]# omreport storage enclosure controller=0 Enclosure(s) on Controller PERC H710 Mini (Embedded) ID : 0:1 [...] [root@sfep2 ~]# omreport storage enclosure controller=0 enclosure=0:1 info=pdslotreport Operation not supported. Read, info=pdslotreport Refer to the documentation for more information. [root@sfep2 ~]# rpm -qf /usr/sbin/dsu dell-system-update-1.3.1-16.11.00.x86_64 -----Original Message----- From: [email protected]<mailto:[email protected]> [mailto:linux-poweredge-<mailto:linux-poweredge-> [email protected]<mailto:[email protected]>] On Behalf Of [email protected]<mailto:[email protected]> Sent: Tuesday, January 24, 2017 4:41 AM To: [email protected]<mailto:[email protected]> Subject: [Linux-PowerEdge] Enumerate total disk bays Dell - Internal Use - Confidential Hi Davide, You can use OMSA ( Open Manage Server Administrator) system management tool to get slot occupancy report for the specific controller. This report will give you the bay details and physical disk slot information. In GUI You can navigate to "Storage->select Report->view slot occupancy report". OMSA CLI COMMAND for getting slot occupancy report: omreport storage enclosure controller=0 enclosure=0:1 info=pdslotreport -------------------------------------OUTPUT------------------------------- -------------------------- Details of Enclosure on Controller PERC ( controller name) ID : 0:1 Slot Count : 24 Occupied Slot Count : 12 Empty Slot Count : 12 Occupied Slots : 0,11,12,13,14,15,16,18,19,21,22,23 Empty Slots : 1,2,3,4,5,6,7,8,9,10,17,20 -------------------------------------------------------------------------- ------------------------------------ Please let us know if you need any more information about this. Regards, Deepesh C.P _______________________________________________ Linux-PowerEdge mailing list [email protected]<mailto:[email protected]> https://lists.us.dell.com/mailman/listinfo/linux-poweredge _______________________________________________ Linux-PowerEdge mailing list [email protected]<mailto:[email protected]> https://lists.us.dell.com/mailman/listinfo/linux-poweredge -- Russell Kackley Subaru Telescope Hilo, Hawaii _______________________________________________ Linux-PowerEdge mailing list [email protected]<mailto:[email protected]> https://lists.us.dell.com/mailman/listinfo/linux-poweredge _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge
