iDRAC is not responding. The network switch connects but at 10 half and no mac address is presented.
The second R610 that has a working iDRAC (but no password) is not giving any video past "Configuring System Memory" so something else is wrong with this one. This was not upgraded AFAIK. So I can't issue ctrl-E to reset the password. There's a third one that I may be able to pull. On Fri, May 12, 2017 at 11:42 AM, <jens_he...@dell.com> wrote: > Usually this is the default behavior if the systems wasn’t able to enter > lifecycle controller multiple times or someone manually disabled system > services. > > You can go to BIOS an enable system services & try again. If the system is > working fine then, no further action required. If you still experience > issues entering lifecycle controller, try to install the repair package > (.usc) via iDRAC GUI. > > > > *From:* linux-poweredge-bounces-Lists *On Behalf Of *Ricardo Stella > *Sent:* Freitag, 12. Mai 2017 16:26 > *To:* linux-poweredge-Lists <linux-powere...@lists.us.dell.com> > *Subject:* [Linux-PowerEdge] R610 - system services disabled and iDrac6 > (entrerpise) communication failure > > > > > > So we had this older R610 which was put off production and was trying to > give it a new life. Used Dell repository manager to create a firmware > bundle and after this got the errors on the title. > > > > Obviously, the system didn't like the firmware updates, so has anyone else > experienced this before and know of a way around it? System is out of > warranty and all I'm able to get in touch with at Dell is basic support (ie > motherboard is bad). > > > > Supposedly, the LCC repair package is what's needed (USC file) but do I > need to install an OS on this first? Is there a live CD/DVD/USB with the > Dell Linux Repository by any chance or a way to quickly build one? Or do I > need to install an OS on this first? > > > > I have a second R610 (clone) that has not been updated and iDRAC does boot > and I can get to the GUI, except it needs a password reset, and for some > reason the box is not displaying any video. > > > > Any ideas? Thanks in advance. > > > > -- > > °(((*=*((*===°°°*(((*================================================* > > _______________________________________________ > Linux-PowerEdge mailing list > Linux-PowerEdge@dell.com > https://lists.us.dell.com/mailman/listinfo/linux-poweredge > > -- °(((=((===°°°(((================================================
_______________________________________________ Linux-PowerEdge mailing list Linux-PowerEdge@dell.com https://lists.us.dell.com/mailman/listinfo/linux-poweredge
