On 01/22/2018 09:53 AM, Howard, Chris wrote:
> I don't use it often but I think it was working.
> Now it is not working. It always says there are no controllers.
FWIW, sometimes the MegaRAID kernel drivers get wonked (esp when something is
quite screwed up on the RAID itself), requiring a reboot for megacli to work,
if you haven't done that.
There was also a split a few years back in LSI/Avago/Broadcom/whatever land
where 'storcli' and 'perccli' split functionality depending upon whether it was
a pure LSI device or Dell/other sub-brand. ('storcli' used to work for Dell
controllers but then LSI/Ava... switched it to (i presume) look at the PCI
SubVendor ID and will report "No Controller" if it was a Dell model.
I continue to use MegaCli64-8.07.10 for all my PERC controllers and haven't
had an issue with anything even current. (It Works For Me)
--stepehn
--
Stephen Dowdy - Systems Administrator - NCAR/RAL
303.497.2869 - [email protected] - http://www.ral.ucar.edu/~sdowdy/
_______________________________________________
Linux-PowerEdge mailing list
[email protected]
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
