megacli/storcli won't work, use perccli instead *George Machitidze*
On Mon, Jan 22, 2018 at 9:03 PM, Stephen Dowdy <[email protected]> wrote: > On 01/22/2018 09:53 AM, Howard, Chris wrote: > > I don't use it often but I think it was working. > > Now it is not working. It always says there are no controllers. > > FWIW, sometimes the MegaRAID kernel drivers get wonked (esp when something > is quite screwed up on the RAID itself), requiring a reboot for megacli to > work, if you haven't done that. > > There was also a split a few years back in LSI/Avago/Broadcom/whatever > land where 'storcli' and 'perccli' split functionality depending upon > whether it was a pure LSI device or Dell/other sub-brand. ('storcli' used > to work for Dell controllers but then LSI/Ava... switched it to (i presume) > look at the PCI SubVendor ID and will report "No Controller" if it was a > Dell model. > > I continue to use MegaCli64-8.07.10 for all my PERC controllers and > haven't had an issue with anything even current. (It Works For Me) > > --stepehn > -- > Stephen Dowdy - Systems Administrator - NCAR/RAL > 303.497.2869 - [email protected] - http://www.ral.ucar.edu/~ > sdowdy/ > > _______________________________________________ > Linux-PowerEdge mailing list > [email protected] > https://lists.us.dell.com/mailman/listinfo/linux-poweredge >
_______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge
