On Thu, Dec 28, 2017 at 5:18 AM, Stephen Berg (Contractor, Code 7320) < [email protected]> wrote:
> On 12/26/2017 11:17 AM, Stephen Berg (Contractor, Code 7320) wrote: > >> On 12/26/2017 10:55 AM, Patrick Boutilier wrote: >> >>> On 12/26/2017 09:26 AM, Stephen Berg (Contractor, Code 7320) wrote: >>> >>>> Been updating quite a few systems to OMSA 9.1.0 on SciLinux 7.4 the >>>> last few days. Something in there is breaking my check_openmanage services >>>> in check_mk. >>>> >>>> The last time this happened it was finally figured out that a slight >>>> mod to /opt/dell/srvadmin/etc/srvadmin-storage/stsvc.ini fixed the >>>> issue. I had to make one change in that file: >>>> >>>> "vil7=dsm_sm_psrvil" needed to be "; vil7=dsm_sm_psrvil" >>>> >>>> That same change now does not seem to be working. Checked that >>>> srvadmin-services.sh reports all the services are running. >>>> >>>> During the update to the srvadmin packages that stsvc.ini file was >>>> created as stsvc.ini.rpmnew. Tried using it as is and with the vil7 line >>>> commented out and still no luck seeing any controllers in the system with >>>> omreport. >>>> >>>> Anyone else seeing this and found a fix/workaround? >>>> >>>> >>> What error are you getting? Works fine here on CentOS 7.4 after a >>> "srvadmin-services.sh restart" . >>> >> On these two M610's which are pretty much identical I get one failure and >> one succeeds. >> >> [root@hostname1 ~]# omreport storage controller >> No controllers found >> >> [root@hostname2 ~]# omreport storage controller >> Controller PERC H700 Modular(Embedded) >> >> Controller >> ID : 0 >> Status : Ok >> Name : PERC H700 Modular >> Slot ID : Embedded >> State : Ready >> Firmware Version : 12.10.6-0001 >> <snip> >> >> I've restarted the OMSA services even rebooted one of the systems where >> I'm seeing the problem. It doesn't want to see the controller after all >> that. The system is working just fine besides not being able to run any >> omreport functions for storage. >> >> > I have figured out that removing OMSA 9.1 and reinstalling with 8.5 fixes > the problem. So far I've only seen this issue on a couple dozen M610's and > R610's. Other systems (of the same models) are not affected. I think it > comes down to which RAID controller is installed but haven't had time to > confirm that yet. > > > > > -- > *Stephen Berg* > Systems Administrator > NRL Code: 7320 > Office: 228-688-5738 > [email protected] > NRL Logo > > I have the same issue running OMSA 9.1 and CentOS 7 on R410s with SAS 6/iR Integrated (Embedded) controllers. Downgrading to OMSA 8.5 is the only workaround I've found so far. Other servers with PERC 6/i Integrated (Embedded) controllers work fine with 9.1.
_______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge
