> On 12/26/2017 11:17 AM, Stephen Berg (Contractor, Code 7320) wrote: >> On 12/26/2017 10:55 AM, Patrick Boutilier wrote: >>> On 12/26/2017 09:26 AM, Stephen Berg (Contractor, Code 7320) wrote: >>>> Been updating quite a few systems to OMSA 9.1.0 on SciLinux 7.4 the >>>> last few days. Something in there is breaking my check_openmanage >>>> services in check_mk. >>>> >>>> The last time this happened it was finally figured out that a slight >>>> mod to /opt/dell/srvadmin/etc/srvadmin-storage/stsvc.ini fixed the >>>> issue. I had to make one change in that file: >>>> >>>> "vil7=dsm_sm_psrvil" needed to be "; vil7=dsm_sm_psrvil" >>>> >>>> That same change now does not seem to be working. Checked that >>>> srvadmin-services.sh reports all the services are running. >>>> >>>> During the update to the srvadmin packages that stsvc.ini file was >>>> created as stsvc.ini.rpmnew. Tried using it as is and with the vil7 >>>> line commented out and still no luck seeing any controllers in the >>>> system with omreport. >>>> >>>> Anyone else seeing this and found a fix/workaround? >>>> >>> >>> What error are you getting? Works fine here on CentOS 7.4 after a >>> "srvadmin-services.sh restart" . >> On these two M610's which are pretty much identical I get one failure >> and one succeeds. >> >> [root@hostname1 ~]# omreport storage controller >> No controllers found >> >> [root@hostname2 ~]# omreport storage controller >> Controller PERC H700 Modular(Embedded) >> >> Controller >> ID : 0 >> Status : Ok >> Name : PERC H700 Modular >> Slot ID : Embedded >> State : Ready >> Firmware Version : 12.10.6-0001 >> <snip> >> >> I've restarted the OMSA services even rebooted one of the systems >> where I'm seeing the problem. It doesn't want to see the controller >> after all that. The system is working just fine besides not being >> able to run any omreport functions for storage. >> > > I have figured out that removing OMSA 9.1 and reinstalling with 8.5 > fixes the problem. So far I've only seen this issue on a couple dozen > M610's and R610's. Other systems (of the same models) are not > affected. I think it comes down to which RAID controller is installed > but haven't had time to confirm that yet.
Hello Stephen, did you ever figure something out or received an answer from Dell for this issue? I have now run into the same situation, but so far only on M610 and M710: [M610]# omreport storage controller No controllers found This issue seems to be limited to the "SAS 6/iR Integrated" controller, e.g. all our M610 have this controller. A R510 with a PERC H700 is working fine with OMSA 9.1.0 Regards, Stefan _______________________________________________ Linux-PowerEdge mailing list Linux-PowerEdge@dell.com https://lists.us.dell.com/mailman/listinfo/linux-poweredge
