hi lejeczek You wrote "one box gets shoot in the head". Are you running the Pacemaker cluster framework with Corosync and STONITH?
Stefan > On Jul 11, 2018, at 6:03 PM, lejeczek <[email protected]> wrote: > > hi guys > > I wonder if any of you might be using SFC9000(same firmware everywhere, > Centos 7.5 too) with your poweredge. I'm on r815. > > I'm trying poor man's setup to get the servers onto 10GbE network. > > Setup is such that three R815 are connected to each other, each has one > Solarflare(SFP ports) and each Solarflare is set as net-team(both ports on a > card are net-team device) with runner in broadcast mode. And it all seems to > work, they ping each other, iperf okey. > > The problem, big problem is that when traffic start to flow between all three > servers simultaneously, with rsync for example, then!! one box gets shoot in > the head, hard reset, gone. > > Now, I know you would normally put it via a switch, but like I said: poor > man's config, but you would not expect system to die like this neither, right? > > Anybody? > > many thanks, L. > > _______________________________________________ > Linux-PowerEdge mailing list > [email protected] > https://lists.us.dell.com/mailman/listinfo/linux-poweredge _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge
