On Thu, 6 Aug 2009, [email protected] wrote: > This issue is a know issue. Issue was not seen by passing > "disable_msi=1" module option to bnx2 driver and issue is not seen with > Dell dkms bnx2 driver from support.dell.com (bnx2 driver version > 1.8.7b).
I am relieved to know this is a known issue! Thank you so much for letting me know. I will try the modprobe.conf route for the moment to see if that helps. > 1. What is the network traffic load and pattern on the nodes that show > this behaviour ? I only have 1 node :) The network traffic load is very minimal, currently averaging around 256kbps... The machine is just answering database queries over a local gigE network. > 2. How much time does it take to see this issue ? Well, it has only happened twice (the past two days) early in the morning. > 3. Does the other port not showing this failure work when the in use > port fails ? I did not have it enabled until this morning after the second failure. I will check it out if it happens again, hopefully not! :) daryl _______________________________________________ Linux-PowerEdge mailing list [email protected] https://lists.us.dell.com/mailman/listinfo/linux-poweredge Please read the FAQ at http://lists.us.dell.com/faq
