Thanks for the reply,
I believe i am using the correct password. Attached is more log from my
setup.
print lan info shows NONE MD2 MD5 PASSWORD are supported auth types. But
when I issue ipmi command, the verbose mode shows no supported Auth types
and its blank.
Any suggestions ?
Thanks,
[r...@xxxx tmp]# ipmitool user list 1
ID Name Callin Link Auth IPMI Msg Channel Priv Limit
2 root true true true ADMINISTRATOR
[r...@xxx tmp]# ipmitool channel info
Channel 0x3 info:
Channel Medium Type : System Interface
Channel Protocol Type : KCS
Session Support : session-less
Active Session Count : 0
Protocol Vendor ID : 7154
[r...@xxxx tmp]# ipmitool channel info 1
Channel 0x1 info:
Channel Medium Type : 802.3 LAN
Channel Protocol Type : IPMB-1.0
Session Support : multi-session
Active Session Count : 0
Protocol Vendor ID : 7154
Volatile(active) Settings
Alerting : disabled
Per-message Auth : disabled
User Level Auth : enabled
Access Mode : always available
Non-Volatile Settings
Alerting : disabled
Per-message Auth : disabled
User Level Auth : enabled
Access Mode : always available
[r...@xxxx tmp]# ipmitool lan print 1
Set in Progress : Set In Progress
Auth Type Support : NONE MD2 MD5 PASSWORD
Auth Type Enable : Callback : MD2 MD5
: User : MD2 MD5
: Operator : MD2 MD5
: Admin : MD2 MD5
: OEM : MD2 MD5
IP Address Source : Static Address
IP Address : 10.1.1.13
Subnet Mask : 255.255.255.0
MAC Address : 00:24:e8:75:17:79
SNMP Community String : public
IP Header : TTL=0x40 Flags=0x40 Precedence=0x00 TOS=0x10
Default Gateway IP : 10.1.1.1
Default Gateway MAC : 00:00:00:00:00:00
Backup Gateway IP : 0.0.0.0
Backup Gateway MAC : 00:00:00:00:00:00
802.1q VLAN ID : Disabled
802.1q VLAN Priority : 0
RMCP+ Cipher Suites : 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14
Cipher Suite Priv Max : aaaaaaaaaaaaaaa
: X=Cipher Suite Unused
: c=CALLBACK
: u=USER
: o=OPERATOR
: a=ADMIN
: O=OEM
[r...@xxxx]# ./ipmitool -I lan -H 10.1.1.13 -U root -P s0lid -A PASSWORD
power status -vv
ipmi_lan_send_cmd:opened=[0], open=[4461360]
IPMI LAN host 10.1.1.13 port 623
Sending IPMI/RMCP presence ping packet
Received IPMI/RMCP response packet:
IPMI Supported
ASF Version 1.0
RMCP Version 1.0
RMCP Sequence 255
IANA Enterprise 4542
ipmi_lan_send_cmd:opened=[1], open=[4461360]
Channel 01 Authentication Capabilities:
Privilege Level : ADMINISTRATOR
*Auth Types :*
Per-msg auth : enabled
User level auth : enabled
Non-null users : enabled
Null users : disabled
Anonymous login : disabled
Authentication type PASSWORD not supported
ipmi_lan_send_cmd:opened=[1], open=[4461360]
Channel 01 Authentication Capabilities:
Privilege Level : ADMINISTRATOR
* Auth Types :*
Per-msg auth : enabled
User level auth : enabled
Non-null users : enabled
Null users : disabled
Anonymous login : disabled
Authentication type PASSWORD not supported
Error: Unable to establish LAN session
Failed to open LAN interface
Unable to get Chassis Power Status
You have new mail in /var/spool/mail/root
On Mon, Aug 24, 2009 at 4:15 AM, <[email protected]> wrote:
> Hello,
>
>
>
> I am able to get the correct info on my R710 with IPMItool version 1.8.11
>
> Kernel: 2.6.18-162
>
>
>
> Can you please let me know if you are using the correct password to login
> to your BMC?
>
>
>
>
>
_______________________________________________
Linux-PowerEdge mailing list
[email protected]
https://lists.us.dell.com/mailman/listinfo/linux-poweredge
Please read the FAQ at http://lists.us.dell.com/faq
