I compiled Linux kernel 2.2.2 and PPP comes up, but does not
estabilishes the PPP connection. (Dial up connection is estabilished. It
work perfectly well with Kernel 2.0.35.
I have a new stable debian system. I Installed a newest modutils and
setserial.
pppd is 2.3.5
Everythink seems to be up to the required revision. Yes, ppp.o is
compiled and installed.
I seems to be sending and receiving data. see the listing below.
Also when I boot up with the new Kernel I have a a log message:
SIOCADDRT invalid argument
and PPP is demand dial in the power up print out.
Note. For the printout bellow, every file is the same, but the kernel
and ppp.o
Good operation:
hunnia pppd[275]: Using interface pp
pppd[275]: Connect: ppp0 <--> /dev/ttyS2
pppd[275]: sent [LCP ConfReq id=0x1 <magic 0xe1fb2841> <pcomp> <accomp>]
pppd[275]: rcvd [LCP ConfReq id=0x9f <asyncmap 0xa0000> <auth pap>
<magic 0x9037b89e> <pcomp> <accomp>]
pppd[275]: sent [LCP ConfAck id=0x9f <asyncmap 0xa0000> <auth pap>
<magic 0x9037b89e> <pcomp> <accomp>]
pppd[275]: sent [LCP ConfReq id=0x1 <magic 0xe1fb2841> <pcomp> <accomp>]
pppd[275]: rcvd [LCP ConfReq id=0xa0 <asyncmap 0xa0000> <auth pap>
<magic 0x9037b89e> <pcomp> <accomp>]
pppd[275]: sent [LCP ConfAck id=0xa0 <asyncmap 0xa0000> <auth pap>
<magic 0x9037b89e> <pcomp> <accomp>]
pppd[275]: sent [LCP ConfReq id=0x1 <magic 0xe1fb2841> <pcomp> <accomp>]
pppd[275]: rcvd [LCP ConfReq id=0xa1 <asyncmap 0xa0000> <auth pap>
<magic 0x9037cdab> <pcomp> <accomp>]
pppd[275]: sent [LCP ConfAck id=0xa1 <asyncmap 0xa0000> <auth pap>
<magic 0x9037cdab> <pcomp> <accomp>]
pppd[275]: rcvd [LCP ConfAck id=0x1 <magic 0xe1fb2841> <pcomp> <accomp>]
pppd[275]: sent [PAP AuthReq id=0x1 user="xxxxx" password="yyyyyy"]
pppd[275]: rcvd [PAP AuthAck id=0x1 ""]
pppd[275]: Remote message:
pppd[275]: sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <compress VJ 0f 01>]
pppd[275]: rcvd [IPCP ConfReq id=0x27 <compress VJ 0f 00> <addr
194.143.224.61>]
pppd[275]: sent [IPCP ConfAck id=0x27 <compress VJ 0f 00> <addr
194.143.224.61>]
pppd[275]: rcvd [IPCP ConfReq id=0x28 <compress VJ 0f 00> <addr
194.143.224.61>]
pppd[275]: sent [IPCP ConfAck id=0x28 <compress VJ 0f 00> <addr
194.143.224.61>]
pppd[275]: sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <compress VJ 0f 01>]
pppd[275]: rcvd [IPCP ConfNak id=0x1 <addr 194.143.233.149>]
pppd[275]: sent [IPCP ConfReq id=0x2 <addr 194.143.233.149> <compress VJ
0f 01>]
pppd[275]: rcvd [IPCP ConfAck id=0x2 <addr 194.143.233.149> <compress VJ
0f 01>]
pppd[275]: local IP address 194.143.233.149
pppd[275]: remote IP address 194.143.224.61
Bad operation:
19:24:55 hunnia pppd[290]: Connect: ppp0 <--> /dev/ttyS2
pppd[290]: sent [LCP ConfReq id=0x1 <magic 0x43e7299a> <pcomp> <accomp>]
pppd[290]: rcvd [LCP ConfReq id=0xc5 <asyncmap 0xa0000> <auth pap>
<magic 0x5c3c68cb> <pcomp> <accomp>]
pppd[290]: sent [LCP ConfAck id=0xc5 <asyncmap 0xa0000> <auth pap>
<magic 0x5c3c68cb> <pcomp> <accomp>]
pppd[290]: sent [LCP ConfReq id=0x1 <magic 0x43e7299a> <pcomp> <accomp>]
pppd[290]: rcvd [LCP ConfReq id=0xc6 <asyncmap 0xa0000> <auth pap>
<magic 0x5c3c68cb> <pcomp> <accomp>]
pppd[290]: sent [LCP ConfAck id=0xc6 <asyncmap 0xa0000> <auth pap>
<magic 0x5c3c68cb> <pcomp> <accomp>]
pppd[290]: rcvd [LCP ConfReq id=0xc7 <asyncmap 0xa0000> <auth pap>
<magic 0x5c3c68cb> <pcomp> <accomp>]
pppd[290]: sent [LCP ConfAck id=0xc7 <asyncmap 0xa0000> <auth pap>
<magic 0x5c3c68cb> <pcomp> <accomp>]
pppd[290]: sent [LCP ConfReq id=0x1 <magic 0x43e7299a> <pcomp> <accomp>]
pppd[290]: rcvd [LCP ConfReq id=0xc8 <asyncmap 0xa0000> <auth pap>
<magic 0x5c3c68cb> <pcomp> <accomp>]
pppd[290]: sent [LCP ConfAck id=0xc8 <asyncmap 0xa0000> <auth pap>
<magic 0x5c3c68cb> <pcomp> <accomp>]
pppd[290]: sent [LCP ConfReq id=0x1 <magic 0x43e7299a> <pcomp> <accomp>]
pppd[290]: rcvd [LCP ConfReq id=0xc9 <asyncmap 0xa0000> <auth pap>
<magic 0x5c3c68cb> <pcomp> <accomp>]
pppd[290]: sent [LCP ConfAck id=0xc9 <asyncmap 0xa0000> <auth pap>
<magic 0x5c3c68cb> <pcomp> <accomp>]
pppd[290]: rcvd [LCP ConfReq id=0xca <asyncmap 0xa0000> <auth pap>
<magic 0x5c3c68cb> <pcomp> <accomp>]
pppd[290]: sent [LCP ConfAck id=0xca <asyncmap 0xa0000> <auth pap>
<magic 0x5c3c68cb> <pcomp> <accomp>]
pppd[290]: sent [LCP ConfReq id=0x1 <magic 0x43e7299a> <pcomp> <accomp>]
pppd[290]: rcvd [LCP ConfReq id=0xcb <asyncmap 0xa0000> <auth pap>
<magic 0x5c3c68cb> <pcomp> <accomp>]
pppd[290]: sent [LCP ConfAck id=0xcb <asyncmap 0xa0000> <auth pap>
<magic 0x5c3c68cb> <pcomp> <accomp>]
pppd[290]: sent [LCP ConfReq id=0x1 <magic 0x43e7299a> <pcomp> <accomp>]
pppd[290]: rcvd [LCP ConfReq id=0xcc <asyncmap 0xa0000> <auth pap>
<magic 0x5c3c68cb> <pcomp> <accomp>]
pppd[290]: sent [LCP ConfAck id=0xcc <asyncmap 0xa0000> <auth pap>
<magic 0x5c3c68cb> <pcomp> <accomp>]
pppd[290]: rcvd [LCP ConfReq id=0xcd <asyncmap 0xa0000> <auth pap>
<magic 0x5c3c68cb> <pcomp> <accomp>]
pppd[290]: sent [LCP ConfAck id=0xcd <asyncmap 0xa0000> <auth pap>
<magic 0x5c3c68cb> <pcomp> <accomp>]
pppd[290]: sent [LCP ConfReq id=0x1 <magic 0x43e7299a> <pcomp> <accomp>]
pppd[290]: rcvd [LCP ConfReq id=0xce <asyncmap 0xa0000> <auth pap>
<magic 0x5c3c68cb> <pcomp> <accomp>]
pppd[290]: sent [LCP ConfAck id=0xce <asyncmap 0xa0000> <auth pap>
<magic 0x5c3c68cb> <pcomp> <accomp>]
pppd[290]: sent [LCP ConfReq id=0x1 <magic 0x43e7299a> <pcomp> <accomp>]
pppd[290]: rcvd [LCP ConfReq id=0xcf <asyncmap 0xa0000> <auth pap>
<magic 0x5c3c68cb> <pcomp> <accomp>]
pppd[290]: sent [LCP ConfAck id=0xcf <asyncmap 0xa0000> <auth pap>
<magic 0x5c3c68cb> <pcomp> <accomp>]
pppd[290]: Hangup (SIGHUP)
pppd[290]: Modem hangup
hunnia pppd[290]: Connection terminated.
hunnia pppd[290]: Exit.
The omly difference I can see, that in the bad operation we have
sometimes two sets of sent/receive after one sent with id-0x1.
Any ideas? Thanks
--
Lengyel S�ndor
Hass, alkoss, gyarapits,
S a haza f�nyre der�l. (K�lcsey)
-
To unsubscribe from this list: send the line "unsubscribe linux-ppp" in
the body of a message to [EMAIL PROTECTED]
