Your problem is that you are probably using setserial to configure your
serial port.....just let your distro config the serial port....remove any
lines that you added 2 ppp-on or the startfiles that configure the serial
port w/ setserial.....you really dont need 2 use setserial neways because
the speed you issue w/ pppd overides that of setserial. good luck
Lee Dickens
[EMAIL PROTECTED]
Lengyel Sandor wrote:
> I compiled Linux kernel 2.2.2 and PPP comes up, but does not
> estabilishes the PPP connection. (Dial up connection is estabilished. It
> work perfectly well with Kernel 2.0.35.
>
> I have a new stable debian system. I Installed a newest modutils and
> setserial.
> pppd is 2.3.5
> Everythink seems to be up to the required revision. Yes, ppp.o is
> compiled and installed.
> I seems to be sending and receiving data. see the listing below.
> Also when I boot up with the new Kernel I have a a log message:
>
> SIOCADDRT invalid argument
> and PPP is demand dial in the power up print out.
>
> Note. For the printout bellow, every file is the same, but the kernel
> and ppp.o
>
> Good operation:
>
> hunnia pppd[275]: Using interface pp
> pppd[275]: Connect: ppp0 <--> /dev/ttyS2
> pppd[275]: sent [LCP ConfReq id=0x1 <magic 0xe1fb2841> <pcomp> <accomp>]
> pppd[275]: rcvd [LCP ConfReq id=0x9f <asyncmap 0xa0000> <auth pap>
> <magic 0x9037b89e> <pcomp> <accomp>]
> pppd[275]: sent [LCP ConfAck id=0x9f <asyncmap 0xa0000> <auth pap>
> <magic 0x9037b89e> <pcomp> <accomp>]
> pppd[275]: sent [LCP ConfReq id=0x1 <magic 0xe1fb2841> <pcomp> <accomp>]
> pppd[275]: rcvd [LCP ConfReq id=0xa0 <asyncmap 0xa0000> <auth pap>
> <magic 0x9037b89e> <pcomp> <accomp>]
> pppd[275]: sent [LCP ConfAck id=0xa0 <asyncmap 0xa0000> <auth pap>
> <magic 0x9037b89e> <pcomp> <accomp>]
> pppd[275]: sent [LCP ConfReq id=0x1 <magic 0xe1fb2841> <pcomp> <accomp>]
> pppd[275]: rcvd [LCP ConfReq id=0xa1 <asyncmap 0xa0000> <auth pap>
> <magic 0x9037cdab> <pcomp> <accomp>]
> pppd[275]: sent [LCP ConfAck id=0xa1 <asyncmap 0xa0000> <auth pap>
> <magic 0x9037cdab> <pcomp> <accomp>]
> pppd[275]: rcvd [LCP ConfAck id=0x1 <magic 0xe1fb2841> <pcomp> <accomp>]
> pppd[275]: sent [PAP AuthReq id=0x1 user="xxxxx" password="yyyyyy"]
> pppd[275]: rcvd [PAP AuthAck id=0x1 ""]
> pppd[275]: Remote message:
> pppd[275]: sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <compress VJ 0f 01>]
> pppd[275]: rcvd [IPCP ConfReq id=0x27 <compress VJ 0f 00> <addr
> 194.143.224.61>]
> pppd[275]: sent [IPCP ConfAck id=0x27 <compress VJ 0f 00> <addr
> 194.143.224.61>]
> pppd[275]: rcvd [IPCP ConfReq id=0x28 <compress VJ 0f 00> <addr
> 194.143.224.61>]
> pppd[275]: sent [IPCP ConfAck id=0x28 <compress VJ 0f 00> <addr
> 194.143.224.61>]
> pppd[275]: sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <compress VJ 0f 01>]
> pppd[275]: rcvd [IPCP ConfNak id=0x1 <addr 194.143.233.149>]
> pppd[275]: sent [IPCP ConfReq id=0x2 <addr 194.143.233.149> <compress VJ
> 0f 01>]
> pppd[275]: rcvd [IPCP ConfAck id=0x2 <addr 194.143.233.149> <compress VJ
> 0f 01>]
> pppd[275]: local IP address 194.143.233.149
> pppd[275]: remote IP address 194.143.224.61
>
> Bad operation:
>
> 19:24:55 hunnia pppd[290]: Connect: ppp0 <--> /dev/ttyS2
> pppd[290]: sent [LCP ConfReq id=0x1 <magic 0x43e7299a> <pcomp> <accomp>]
> pppd[290]: rcvd [LCP ConfReq id=0xc5 <asyncmap 0xa0000> <auth pap>
> <magic 0x5c3c68cb> <pcomp> <accomp>]
> pppd[290]: sent [LCP ConfAck id=0xc5 <asyncmap 0xa0000> <auth pap>
> <magic 0x5c3c68cb> <pcomp> <accomp>]
> pppd[290]: sent [LCP ConfReq id=0x1 <magic 0x43e7299a> <pcomp> <accomp>]
> pppd[290]: rcvd [LCP ConfReq id=0xc6 <asyncmap 0xa0000> <auth pap>
> <magic 0x5c3c68cb> <pcomp> <accomp>]
> pppd[290]: sent [LCP ConfAck id=0xc6 <asyncmap 0xa0000> <auth pap>
> <magic 0x5c3c68cb> <pcomp> <accomp>]
> pppd[290]: rcvd [LCP ConfReq id=0xc7 <asyncmap 0xa0000> <auth pap>
> <magic 0x5c3c68cb> <pcomp> <accomp>]
> pppd[290]: sent [LCP ConfAck id=0xc7 <asyncmap 0xa0000> <auth pap>
> <magic 0x5c3c68cb> <pcomp> <accomp>]
> pppd[290]: sent [LCP ConfReq id=0x1 <magic 0x43e7299a> <pcomp> <accomp>]
> pppd[290]: rcvd [LCP ConfReq id=0xc8 <asyncmap 0xa0000> <auth pap>
> <magic 0x5c3c68cb> <pcomp> <accomp>]
> pppd[290]: sent [LCP ConfAck id=0xc8 <asyncmap 0xa0000> <auth pap>
> <magic 0x5c3c68cb> <pcomp> <accomp>]
> pppd[290]: sent [LCP ConfReq id=0x1 <magic 0x43e7299a> <pcomp> <accomp>]
> pppd[290]: rcvd [LCP ConfReq id=0xc9 <asyncmap 0xa0000> <auth pap>
> <magic 0x5c3c68cb> <pcomp> <accomp>]
> pppd[290]: sent [LCP ConfAck id=0xc9 <asyncmap 0xa0000> <auth pap>
> <magic 0x5c3c68cb> <pcomp> <accomp>]
> pppd[290]: rcvd [LCP ConfReq id=0xca <asyncmap 0xa0000> <auth pap>
> <magic 0x5c3c68cb> <pcomp> <accomp>]
> pppd[290]: sent [LCP ConfAck id=0xca <asyncmap 0xa0000> <auth pap>
> <magic 0x5c3c68cb> <pcomp> <accomp>]
> pppd[290]: sent [LCP ConfReq id=0x1 <magic 0x43e7299a> <pcomp> <accomp>]
> pppd[290]: rcvd [LCP ConfReq id=0xcb <asyncmap 0xa0000> <auth pap>
> <magic 0x5c3c68cb> <pcomp> <accomp>]
> pppd[290]: sent [LCP ConfAck id=0xcb <asyncmap 0xa0000> <auth pap>
> <magic 0x5c3c68cb> <pcomp> <accomp>]
> pppd[290]: sent [LCP ConfReq id=0x1 <magic 0x43e7299a> <pcomp> <accomp>]
> pppd[290]: rcvd [LCP ConfReq id=0xcc <asyncmap 0xa0000> <auth pap>
> <magic 0x5c3c68cb> <pcomp> <accomp>]
> pppd[290]: sent [LCP ConfAck id=0xcc <asyncmap 0xa0000> <auth pap>
> <magic 0x5c3c68cb> <pcomp> <accomp>]
> pppd[290]: rcvd [LCP ConfReq id=0xcd <asyncmap 0xa0000> <auth pap>
> <magic 0x5c3c68cb> <pcomp> <accomp>]
> pppd[290]: sent [LCP ConfAck id=0xcd <asyncmap 0xa0000> <auth pap>
> <magic 0x5c3c68cb> <pcomp> <accomp>]
> pppd[290]: sent [LCP ConfReq id=0x1 <magic 0x43e7299a> <pcomp> <accomp>]
> pppd[290]: rcvd [LCP ConfReq id=0xce <asyncmap 0xa0000> <auth pap>
> <magic 0x5c3c68cb> <pcomp> <accomp>]
> pppd[290]: sent [LCP ConfAck id=0xce <asyncmap 0xa0000> <auth pap>
> <magic 0x5c3c68cb> <pcomp> <accomp>]
> pppd[290]: sent [LCP ConfReq id=0x1 <magic 0x43e7299a> <pcomp> <accomp>]
> pppd[290]: rcvd [LCP ConfReq id=0xcf <asyncmap 0xa0000> <auth pap>
> <magic 0x5c3c68cb> <pcomp> <accomp>]
> pppd[290]: sent [LCP ConfAck id=0xcf <asyncmap 0xa0000> <auth pap>
> <magic 0x5c3c68cb> <pcomp> <accomp>]
> pppd[290]: Hangup (SIGHUP)
> pppd[290]: Modem hangup
> hunnia pppd[290]: Connection terminated.
> hunnia pppd[290]: Exit.
>
> The omly difference I can see, that in the bad operation we have
> sometimes two sets of sent/receive after one sent with id-0x1.
>
> Any ideas? Thanks
>
> --
> Lengyel S�ndor
>
> Hass, alkoss, gyarapits,
> S a haza f�nyre der�l. (K�lcsey)
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-ppp" in
> the body of a message to [EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe linux-ppp" in
the body of a message to [EMAIL PROTECTED]
