Subject: Thanks for your help on PPP mailing list
Date: Sun, Oct 04, 1998 at 10:01:51PM +0200
>
> Could you help me:
> To use diald, I had to configure the file /etc/ppp/connect as follow:
> MODEM_INIT=ATZ&C1&D2%C0
> PHONE_NUMBER=my_isp dialin number
> USER_CHAT_SEQ=ogin:
> ..etc..(I mean all the usual stuff withg password..etc).
> And my /etc/diald.conf is well configured with stuff like:
> fifo /etc/diald/diald.ctl
> mode ppp
> connect :sh /etc/ppp/connect"
> device /dev/modem
> speed 38400
> etc..
> But when I run /etc/ppp/connect (all permissions are OK), I get error:
> C1 command not found
> D2%C0 command not found
> or: /etc/ppp/connect:ppp:command not found
> and ATZ&C1&D2%C0 comes up on the screen and stands there eternally
> before I get back to my habitual command line.
> No modem dialin..nothin..and I ve tried my own modem init strings..still
> same problem.
>
> thanks for helpin
Try MODEM_INIT='ATZ&C1&D2%C0'
HTH
-
To unsubscribe from this list: send the line "unsubscribe linux-ppp" in
the body of a message to [EMAIL PROTECTED]
