Hi,
Thank you for your message.
What I am looking for is how to connnect the two linux running computers
using modem configured in LEASED LINE MODE. The howto only talk about null
modem cable and configuring client and server for dial up purpose. It does
not mention how I can connect two computer using modems, which are given
lease line command I mean in dumb mode.
I am not interested on dialup session, I can configure that with mgetty or
portslave. This is my scenario:
1. I have two linux box running redhat linux 5.2 in my office
2. I have configured Multitech's 224E modem in leased line mode, using
ATL1&C1&D2&L1&S0=0&W&W1 FOR ONE MODEM (ORIGINATING MODEM)
ATL1&C1&D2&L1&S0=1&W&W1 (ANSWERING MODEM)
which are connected to each linux box respectively.
3.I have connected these two modems with standard telephone connector,
RJ11, as a physical connection.
4. Now, how can I configure PPP between these two computers so that I can
make these two computers talk to each others whenever there is a proper
connection.
5. So that I can utilize the resources of each other, like telnet, ftp, www
etc.
TIA.
Regards,
ranjan
At 08:38 AM 5/28/99 -0700, Ray Olszewski wrote:
>From this general a question, it is hard to know what you need help with.
>The PPP HowTo has pretty good sections on setting up both the "client"
>(dialing) and "server" (answering) ends of a modem connection, and it has a
>section on linking 2 computers directly over a serial (null-modem) cable.
>Your setup is a fairly simple mix of the two, with the detail difficulties
>in areas you haven't mentioned (like how your server wants to authenticate
>the client).
>
>I'd suggest you start with this HowTo, then follow up here with any specific
>questions you have about how to proceed.
>
>BTW, there is no such thing as "linux 5.2". You probably mean version 5.2 of
>some Linux distribution (e.g., Red Hat, SuSE), and you might want to mention
>which distribution you are using in any subsequent posting.
>
>At 04:05 PM 5/27/99 +0500, R. Koirala wrote:
>>Dear Sir,
>>
>>I am trying to connect two computer running linux 5.2 using lease line
>>connection through modem, configured in leased mode. I am trying to use ppp
>>on the both side so that each computer can recognize each other. Any
>>suggestion how this can be achieved so that I can establish the ppp
>>connection between the two computers.
>------------------------------------"Never tell me the odds!"---
>Ray Olszewski -- Han Solo
>762 Garland Drive
>Palo Alto, CA 94303-3603
>650.328.4219 voice [EMAIL PROTECTED]
>----------------------------------------------------------------
>
>
>
-
To unsubscribe from this list: send the line "unsubscribe linux-ppp" in
the body of a message to [EMAIL PROTECTED]
