On Wed, 4 Aug 1999, [iso-8859-1] S�bastien COTTALORDA wrote:
> Of course I have.
>
> I've just seen that some US Robotics Modem are incompatibles with the Red Hat
> 5.2, maybe mine ????
> I've an US ROBOTICS Sportser Flash 33600.
As stated in "USR Sportster users guide":
"> Make sure your software and modem are set to the same flow control
> setting and to either a fixed or variable serial port rate"
You can load template wich set hardware flow control as well as
other optimal setings. Btw, often error is than default setings of USR is
AT&B0 wich is as explained in users guide:
&B0 - Variable, follows connection rate
&B1 - Fixed serial port rate
&B2 - ......
Hope this helps.
zImage
--=- --rw------- =--=--=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Theodor Milkov http://www.zImage.DelBG.com
Davidov Electric Ltd. Phone: +359 2 736273
--=--=--=--=--=--=--=--=--=--=--=--=--=--=--=--=--=--=--=--
-
To unsubscribe from this list: send the line "unsubscribe linux-ppp" in
the body of a message to [EMAIL PROTECTED]
