V.90 requires the ISP side to be fully digital. To achieve v90
connections, requires a channenalized E1 from the telco (Phil. uses E1
not T1) then a modem pool capable of handling the connection.
Your 56k USR modem is for client side only and when used to connect to
another modem which is not connected to a digital line will only get up to
33.6
BTW You should be getting 33.6, make sure your line is clean otherwise the
ISP is using old 28.8 modems.
*************************************************************************
Mark Anthony J. Mercado [EMAIL PROTECTED]
Laguna Internet, Incorporated
Rm 404 Vega Centre, Lopez Avenue, Los Banos, Laguna, Philippines 4030
Ph. 63 49 536.0085 Fax. 63 49 536.0067
*************************************************************************
On Sat, 9 Oct 1999, Richard M. wrote:
> I have 56k USR modem, i tried connecting to my ISP which have the same
> modem but i only got 28800 bps connection speed. Is there anything i can
> do for me to get a higher connection speed. What are the factors for this
> problem.
> BTW, i have linux Redhat 6.0
> thanks.
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-ppp" in
> the body of a message to [EMAIL PROTECTED]
>
-
To unsubscribe from this list: send the line "unsubscribe linux-ppp" in
the body of a message to [EMAIL PROTECTED]
