Ilya Shadrin wrote:
>
> I use pppd 2.3.7 on RH 6.0 (2.2.5-15) to connect to ISP.
> pppd starts with options: "demand holdoff 5 idle 300 ipcp-accept-local
> defaultroute lock modem"
>
> If I use ping my.provider to initiate dial, pppd connects OK, but ping has
> 100% packets loss.
> When I cancel this ping and run it again (after pppd connected) it works OK.
> Furthermore, any 'initiating dial' connection outside seems to has same
> problem - it couldn't connect.
>
> Have you any suggestions?
'echo 1 /proc/sys/net/ipv4/ip_dynaddr'
That should allow ping to wait until you connect before it sends its
packets.
> Ilya L. Shadrin
> Automation Coordinator,
> Soros Foundation Kazakstan
> Tel: +7 327 9017373 Fax: +7 3272 503814
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-ppp" in
> the body of a message to [EMAIL PROTECTED]
--
There's no dark side of the moon really. Matter of fact, it's all dark.
-
To unsubscribe from this list: send the line "unsubscribe linux-ppp" in
the body of a message to [EMAIL PROTECTED]
