Hi Paul,
If you don't want dialup networking to dial in win95.
create a new dial up connection, and instead of phone nos
just place a ,(one comma). This will ppp over the modem port for you.
Jones
On Tue, 8 Aug 2000, Paul Sullivan wrote:
>
> Hi All,
>
> It's been a while since I've needed to post anything to the list, but this one has
>me
> stumped (and there is no help from Microsoft's web site either).
>
> I have 2 US Robotics (Courier V Everythin) Modems, one is connected to a
> UNIX/linux PC, and the other to a Windows95 PC.
>
> There is a 2 wire analogue leased line between them. We have established serial
> communications between them (if pppd is started on the LINUX PC, and we watch
> the serial port of the Win95 PC we see the PPP frames) but we can get Win95 to
> establish a ppp connection.
>
> How does one get Dial-up networking to NOT dial, but instead to just start a
>point-to-
> point protocol connection?
>
> Any help is much appreciated. (The modems are setup as per the leased-lini mini
> howto)
>
> Regards
> Paul Sullivan
>
> -----------------
> Paul Sullivan
> GSM 900 : +27 82 7838996 (for SMS)
> FAX : +27 43 7264638
> E-MAIL : [EMAIL PROTECTED]
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-ppp" in
> the body of a message to [EMAIL PROTECTED]
>
-
To unsubscribe from this list: send the line "unsubscribe linux-ppp" in
the body of a message to [EMAIL PROTECTED]
