With the RAID 0.90 code, it will resync in the background after the
machine boots. You don't have to unmount and stop the raid.
-Kristian
<[EMAIL PROTECTED]>
On Tue, 24 Oct 2000, Richard Crane wrote:
> [Follow-up to earlier post ]
>
> I had to confirm that I could boot on either of the two disks in my
> RAID1 mirror. I powered off , disconnected each drive in sequence and
> rebooted w/o incident.
>
> Then I connected both drives and powered on and only one component of
> each raid device was active. The sequenced umount/raidstop/mkraid seems
> to work --- they are being resync'ed now. Problem is, root ( / ) is
> also a raid device so I can't unmount it. Tried booting from CD-ROM but
> can't mount the disks ( should be at /dev/sda and /dev/sdb ).
>
> Is there anything I can do?
>
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-raid" in
> the body of a message to [EMAIL PROTECTED]
>
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [EMAIL PROTECTED]
