Yes I am using the built-in driver. It works fine for Raid0 and RAID1
configurations. I'll change it to see if that helps.
Erik.
----- Original Message -----
From: "Mike Black" <[EMAIL PROTECTED]>
To: "Erik Petersen" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Saturday, February 03, 2001 2:00 AM
Subject: Re: Bug in 2.4.1 md raid5 module
> Are you using the built-in qlogic driver?
>
> I've been using the qla2x00src-4.15Beta.tgz from their website and it's
been
> working 99.99% fine (had big problems with the built-in module that made
me
> change). I've got a similar setup to yours.
>
> Apparently there are still some periodic timeouts that I've heard about
AND
> experienced (not real frequently though -- once a day or so).
> System does appear to lock up for about 15 seconds once in a while.
>
>
> ________________________________________
> Michael D. Black Principal Engineer
> [EMAIL PROTECTED] 321-676-2923,x203
> http://www.csihq.com Computer Science Innovations
> http://www.csihq.com/~mike My home page
> FAX 321-676-2355
> ----- Original Message -----
> From: "Erik Petersen" <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Friday, February 02, 2001 4:30 PM
> Subject: Bug in 2.4.1 md raid5 module
>
>
> Hi,
>
> When running md (built-in) and raid5 (as a module) on 2.4.1 with modutils
> 2.4.2 the system locks up solid when I do the following twice in a row:
>
> dd if=/dev/zero of=/path/to/mounted/ext2/raid5/partition/filename bs=1k
> count=400000
>
> I created a 5 disk + 1 spare RAID5 on 100MB partitions of each disk (6
FCAL
> disks + QLogic FC adapter). I did mke2fs /dev/md0 with no options. Chunk
> size is 64K. The array was fully synced before the fs was built and
mounted.
>
> I'm running an SMP board + kernel with 1 CPU. NMI watchdog is enabled but
> never fires. The system simply freezes with no messages (no caps lock/num
> lock/scroll lock).
>
> Thanks Ingo for setting up the sourceforge thing. I'll enter this into the
> bug log as soon as I can get logged into the dang thing.
>
> --
> Erik Petersen
> LAND-5 Corporation
> <[EMAIL PROTECTED]>
>
>
>
>
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [EMAIL PROTECTED]
