When debugging some other problem, I noticied that direct-io (O_DIRECT) write speed on a software raid5 is terrible slow. Here's a small table just to show the idea (not numbers by itself as they vary from system to system but how they relate to each other). I measured "plain" single-drive performance (sdX below), performance of a raid5 array composed from 5 sdX drives, and ext3 filesystem (the file on the filesystem was pre-created during tests). Speed measurements performed with 8Kbyte buffer aka write(fd, buf, 8192*1024), units a Mb/sec.
write read sdX 44.9 45.5 md 1.7* 31.3 fs on md 0.7* 26.3 fs on sdX 44.7 45.3
"Absolute winner" is a filesystem on top of a raid5 array: 700 kilobytes/sec, sorta like a 300-megabyte ide drive some 10 years ago...
The raid5 array built with mdadm with default options, aka Layout = left-symmetric, Chunk Size = 64K. The same test with raid0 or raid1 for example shows quite good performance (still not perfect but *much* better than for raid5).
It's quite interesting how I/O speed is different for fs on md vs fs on sdX case - with fs on sdX, filesystem code adds almost nothing to the plain partition speed, while it makes alot of difference when used on top of an md device.
Comments anyone? ;)
Thanks.
/mjt - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
