linux-raid  

Messages by Thread

• md3: unsupported reshape (reduce disks) required - aborting Bernd Schubert
• Get loan from xaio loan company........Apply now!!! XAIO LOAN COMPANY
• Kernel panic on RAID1 root after upgrade Richard Ray
• board/controller recommendations? Dexter Filmore
  • Re: board/controller recommendations? Justin Piszcz
  • Re: board/controller recommendations? Dexter Filmore
  • Re: board/controller recommendations? Justin Piszcz
  • Re: board/controller recommendations? Dexter Filmore
  • Re: board/controller recommendations? Justin Piszcz
• mismatch_cnt != 0 Justin Piszcz
  • Re: mismatch_cnt != 0 Michael Tokarev
  • Re: mismatch_cnt != 0 Justin Piszcz
  • Re: mismatch_cnt != 0 Justin Piszcz
  • Re: mismatch_cnt != 0 Carlos Carvalho
  • Re: mismatch_cnt != 0 Justin Piszcz
  • Re: mismatch_cnt != 0 Janek Kozicki
  • Re: mismatch_cnt != 0 Justin Piszcz
• Odd performance observation for RAID0 Joe Landman
• Increased Reliability by using Raid Pete/Piet Delaney
• Further clarification of the sync_action check behavior. Harrell, Thomas
  • Re: Further clarification of the sync_action check behavior. Richard Scobie
• MD sysfs/kobject issues in SAN environment. greg
• RAID10 far (f2) read throughput on random and sequential / read-ahead Nat Makarevitch
  • Re: RAID10 far (f2) read throughput on random and sequential / read-ahead Nat Makarevitch
  • Re: RAID10 far (f2) read throughput on random and sequential / read-ahead Keld Jørn Simonsen
• How many drives are bad? Norman Elton
  • Re: How many drives are bad? Justin Piszcz
  • Re: How many drives are bad? Norman Elton
  • Re: How many drives are bad? Justin Piszcz
  • Re: How many drives are bad? Norman Elton
  • Re: How many drives are bad? Justin Piszcz
  • Re: How many drives are bad? Norman Elton
  • RE: How many drives are bad? Steve Fairbairn
  • RE: How many drives are bad? Guy Watkins
  • Re: How many drives are bad? Peter Grandi
  • Re: How many drives are bad? Norman Elton
  • Re: How many drives are bad? pg_mh
  • Re: How many drives are bad? Peter Rabbitson
  • Re: How many drives are bad? Neil Brown
  • RE: How many drives are bad? Guy Watkins
• HDD errors in dmesg, but don't know why... Steve Fairbairn
  • Re: HDD errors in dmesg, but don't know why... Justin Piszcz
  • Re: HDD errors in dmesg, but don't know why... Jeff Garzik
• suns raid-z / zfs Keld Jørn Simonsen
  • Re: suns raid-z / zfs Neil Brown
  • Re: suns raid-z / zfs Keld Jørn Simonsen
  • Re: suns raid-z / zfs Neil Brown
  • Re: suns raid-z / zfs Keld Jørn Simonsen
  • Re: suns raid-z / zfs Mario 'BitKoenig' Holbe
• Create Raid6 with 1 missing member fails Sevrin Robstad
  • Re: Create Raid6 with 1 missing member fails Neil Brown
• RAID5 to RAID6 reshape? Beolach
  • Re: RAID5 to RAID6 reshape? Peter Grandi
  • Re: RAID5 to RAID6 reshape? Conway S. Smith
  • Re: RAID5 to RAID6 reshape? Janek Kozicki
  • Re: RAID5 to RAID6 reshape? Beolach
  • Re: RAID5 to RAID6 reshape? Janek Kozicki
  • LVM performance (was: Re: RAID5 to RAID6 reshape?) Oliver Martin
  • Re: LVM performance (was: Re: RAID5 to RAID6 reshape?) Jon Nelson
  • Re: LVM performance (was: Re: RAID5 to RAID6 reshape?) Iustin Pop
  • Re: LVM performance Peter Rabbitson
  • Re: LVM performance (was: Re: RAID5 to RAID6 reshape?) Peter Grandi
  • Re: LVM performance Oliver Martin
  • Re: RAID5 to RAID6 reshape? Peter Grandi
  • Re: RAID5 to RAID6 reshape? Alexander Kühn
  • Re: RAID5 to RAID6 reshape? Peter Grandi
  • Re: RAID5 to RAID6 reshape? Nagilum
  • Re: RAID5 to RAID6 reshape? Peter Grandi
  • Re: RAID5 to RAID6 reshape? Nagilum
  • Re: RAID5 to RAID6 reshape? Janek Kozicki
  • Re: RAID5 to RAID6 reshape? Conway S. Smith
  • Re: RAID5 to RAID6 reshape? Neil Brown
  • Re: RAID5 to RAID6 reshape? Mark Hahn
  • Re: RAID5 to RAID6 reshape? Janek Kozicki
  • Re: RAID5 to RAID6 reshape? Andre Noll
  • Re: RAID5 to RAID6 reshape? Mark Hahn
  • Re: RAID5 to RAID6 reshape? Janek Kozicki
  • Re: RAID5 to RAID6 reshape? cat
  • Re: RAID5 to RAID6 reshape? Neil Brown
• Re: [BUG] OOPS 2.6.24.2 raid5 write with ioatdma Dan Williams
  • Re: [BUG] OOPS 2.6.24.2 raid5 write with ioatdma Shannon Nelson
• [BUGREPORT] The kernel thread for md RAID10 could cause a md RAID10 array deadlock K.Tanaka
• Got raid10 assembled wrong - how to fix? George Spelvin
  • Re: Got raid10 assembled wrong - how to fix? Michael Tokarev
• patch for raid10,f>1 to operate like raid0 Keld Jørn Simonsen
• transferring RAID-1 drives via sneakernet Jeff Breidenbach
  • Re: transferring RAID-1 drives via sneakernet David Greaves
  • Re: transferring RAID-1 drives via sneakernet Jeff Breidenbach
  • Re: transferring RAID-1 drives via sneakernet Brendan Conoboy
  • Re: transferring RAID-1 drives via sneakernet Jeff Breidenbach
  • Re: transferring RAID-1 drives via sneakernet Michael Tokarev
  • Re: transferring RAID-1 drives via sneakernet David Greaves
  • Re: transferring RAID-1 drives via sneakernet Jeff Breidenbach
• my io testing scripts Keld Jørn Simonsen
• howto on performance Keld Jørn Simonsen
• kernel BUG at drivers/md/md.c:5145! Janos Haar
• RAID5 how chage chunck size from 64 to 128, 256 ? is it possible ? Andreas-Sokov
  • Re: RAID5 how chage chunck size from 64 to 128, 256 ? is it possible ? Justin Piszcz
  • Re: RAID5 how chage chunck size from 64 to 128, 256 ? is it possible ? Janek Kozicki
  • Re: RAID5 how chage chunck size from 64 to 128, 256 ? is it possible ? Justin Piszcz
• ICH10 support Mike Myers
• mdadm 2.6 creates slow RAID 5 while mdadm 2.5.6 rocks Hubert Verstraete
  • Re: mdadm 2.6 creates slow RAID 5 while mdadm 2.5.6 rocks michael
  • Re: mdadm 2.6 creates slow RAID 5 while mdadm 2.5.6 rocks Hubert Verstraete
  • Re: mdadm 2.6 creates slow RAID 5 while mdadm 2.5.6 rocks Hubert Verstraete
• Any inexpensive hardware recommendations for PCI interface cards? Steve Fairbairn
  • Re: Any inexpensive hardware recommendations for PCI interface cards? Tim Southerwood
  • Re: Any inexpensive hardware recommendations for PCI interface cards? Bill Davidsen
  • Re: Any inexpensive hardware recommendations for PCI interface cards? Justin Piszcz
  • Re: Any inexpensive hardware recommendations for PCI interface cards? Iustin Pop
  • Re: Any inexpensive hardware recommendations for PCI interface cards? Justin Piszcz
  • Re: Any inexpensive hardware recommendations for PCI interface cards? Iustin Pop
  • Re: Any inexpensive hardware recommendations for PCI interface cards? Justin Piszcz
  • Re: Any inexpensive hardware recommendations for PCI interface cards? Jeff Breidenbach
• howto and faq Keld Jørn Simonsen
  • Re: howto and faq David Greaves
  • Re: howto and faq Keld Jørn Simonsen
  • Re: howto and faq David Greaves
  • Re: howto and faq Keld Jørn Simonsen
• raid5: two writing algorithms Keld Jørn Simonsen
  • Re: raid5: two writing algorithms Neil Brown
  • Re: raid5: two writing algorithms Keld Jørn Simonsen
  • Re: raid5: two writing algorithms Neil Brown
  • Re: raid5: two writing algorithms Keld Jørn Simonsen
• [PATCH] Dynamic RAID Stripe Cache Size Yuri Tikhonov
• Disk failure during grow, what is the current state. Steve Fairbairn
  • Re: Disk failure during grow, what is the current state. Nagilum
  • FW: Disk failure during grow, what is the current state. Steve Fairbairn
  • RE: Disk failure during grow, what is the current state. Steve Fairbairn
• recommendations for stripe/chunk size Keld Jørn Simonsen
  • Re: recommendations for stripe/chunk size Justin Piszcz
  • Re: recommendations for stripe/chunk size Bill Davidsen
  • Re: recommendations for stripe/chunk size Wolfgang Denk
  • Re: recommendations for stripe/chunk size Bill Davidsen
  • Re: recommendations for stripe/chunk size Keld Jørn Simonsen
  • Re: recommendations for stripe/chunk size Iustin Pop
  • Re: recommendations for stripe/chunk size Keld Jørn Simonsen
  • Re: recommendations for stripe/chunk size Neil Brown
  • Re: recommendations for stripe/chunk size Neil Brown
  • Re: recommendations for stripe/chunk size Wolfgang Denk
  • Re: recommendations for stripe/chunk size Neil Brown
• Deleting mdadm RAID arrays Marcin Krol
  • Re: Deleting mdadm RAID arrays Moshe Yudkowsky
  • Re: Deleting mdadm RAID arrays Marcin Krol
  • Re: Deleting mdadm RAID arrays Janek Kozicki
  • Re: Deleting mdadm RAID arrays Michael Tokarev
  • Re: Deleting mdadm RAID arrays Moshe Yudkowsky
  • Re: Deleting mdadm RAID arrays Michael Tokarev
  • Re: Auto generation of mdadm.conf (was: Deleting mdadm RAID arrays) Janek Kozicki
  • Re: Auto generation of mdadm.conf Michael Tokarev
  • Re: Auto generation of mdadm.conf Janek Kozicki
  • Re: Deleting mdadm RAID arrays Neil Brown
  • Re: Deleting mdadm RAID arrays Marcin Krol
  • Re: Deleting mdadm RAID arrays Peter Rabbitson
  • Re: Deleting mdadm RAID arrays Marcin Krol
  • Re: Deleting mdadm RAID arrays Neil Brown
  • Re: Deleting mdadm RAID arrays Marcin Krol
  • Re: Deleting mdadm RAID arrays Neil Brown
  • Re: Deleting mdadm RAID arrays Marcin Krol
  • Re: Deleting mdadm RAID arrays Bill Davidsen
  • Re: Deleting mdadm RAID arrays Marcin Krol
  • Re: Deleting mdadm RAID arrays Bill Davidsen
  • Re: Deleting mdadm RAID arrays Marcin Krol
  • Re: Deleting mdadm RAID arrays Bill Davidsen
  • Re: Deleting mdadm RAID arrays David Greaves
  • Re: Deleting mdadm RAID arrays Marcin Krol
• using update-initramfs: how to get new mdadm.conf into the /boot? Or is it XFS? Moshe Yudkowsky
  • Re: using update-initramfs: how to get new mdadm.conf into the /boot? Or is it XFS? Robin Hill
  • Re: using update-initramfs: how to get new mdadm.conf into the /boot? Or is it XFS? maximilian attems
  • Re: using update-initramfs: how to get new mdadm.conf into the /boot? Or is it XFS? Moshe Yudkowsky
  • Re: using update-initramfs: how to get new mdadm.conf into the /boot? Or is it XFS? Bill Davidsen
  • Re: using update-initramfs: how to get new mdadm.conf into the /boot? Or is it XFS? Bill Davidsen
  • Re: using update-initramfs: how to get new mdadm.conf into the /boot? Or is it XFS? Robin Hill
  • Re: using update-initramfs: how to get new mdadm.conf into the /boot? Or is it XFS? Moshe Yudkowsky
  • Re: using update-initramfs: how to get new mdadm.conf into the /boot? Or is it XFS? Moshe Yudkowsky
• raid1 or raid10 for /boot Keld Jørn Simonsen
  • Re: raid1 or raid10 for /boot Robin Hill
  • Re: raid1 or raid10 for /boot Keld Jørn Simonsen
  • Re: raid1 or raid10 for /boot Robin Hill
  • Re: raid1 or raid10 for /boot Bill Davidsen
  • Re: raid1 or raid10 for /boot Keld Jørn Simonsen
• mdadm 2.6.4 : How i can check out current status of reshaping ? Andreas-Sokov
  • Re: mdadm 2.6.4 : How i can check out current status of reshaping ? Neil Brown
  • Re[2]: mdadm 2.6.4 : How i can check out current status of reshaping ? Andreas-Sokov
  • Re: Re[2]: mdadm 2.6.4 : How i can check out current status of reshaping ? Neil Brown
  • Re[4]: mdadm 2.6.4 : How i can check out current status of reshaping ? Andreas-Sokov
  • Re: mdadm 2.6.4 : How i can check out current status of reshaping ? Janek Kozicki
  • Re: mdadm 2.6.4 : How i can check out current status of reshaping ? Bill Davidsen
  • Re[4]: mdadm 2.6.4 : How i can check out current status of reshaping ? Andreas-Sokov
• raid10 on three discs - few questions. Janek Kozicki
  • Re: raid10 on three discs - few questions. Neil Brown
  • Re: raid10 on three discs - few questions. Janek Kozicki
  • Re: raid10 on three discs - few questions. Jon Nelson
  • Re: raid10 on three discs - few questions. Jon Nelson
  • Re: raid10 on three discs - few questions. Bill Davidsen
  • Re: raid10 on three discs - few questions. Jon Nelson
  • Re: raid10 on three discs - few questions. Bill Davidsen
  • Re: raid10 on three discs - few questions. Neil Brown
• RAID needs more to survive a power hit, different /boot layout for example (was Re: draft howto on making raids for surviving a disk crash) Moshe Yudkowsky
  • Re: RAID needs more to survive a power hit, different /boot layout for example (was Re: draft howto on making raids for surviving a disk crash) Robin Hill

• Earlier messages