On Tue, 2006-09-12 at 17:05 -0400, Steve Cousins wrote: > The recent "Messed up creating new array..." thread has someone who > started by using the whole drives but she now wants to use partitions > because the array is not starting automatically on boot (I think that > was the symptom). I'm guessing this is because there is no partigion ID > of "fd" since there isn't even a partition.
> I'm on the verge of re-doing this array with 11 full drives (/dev/sd? as > opposed to /dev/sd?1 and /dev/sd?2). Will I have the same problems with > booting? I like the idea of not having to partition the drives but not > if it is going to cause hassles. I realize that there could be a > potential problem if I need to replace a drive with a slightly different > model that is slightly smaller. >From personal experience, partitions would be much easier. I've still got an issue on my RAID5 where one of the hard disks has a bogus/fake partition table on it (simply due to the data on the RAID appearing like a partition table). It causes problems with lilo and other processes at boot time (all non-fatal except for lilo). Perhaps with time I'll get lucky and the data in that particular part of the drive will be changed to something that looks nothing like a partition table :) Lem. - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
