On Sat, 10 Feb 2007, Eyal Lebedinsky wrote:
I have a six-disk RAID5 over sata. First two disks are on the mobo and last four
are on a Promise SATA-II-150-TX4. The sixth disk was added recently and I
decided
to run a 'check' periodically, and started one manually to see how long it
should
take. Vanilla 2.6.20.
A 'dd' test shows:
# dd if=/dev/md0 of=/dev/null bs=1024k count=10240
10240+0 records in
10240+0 records out
10737418240 bytes transferred in 84.449870 seconds (127145468 bytes/sec)
This is good for this setup. A check shows:
$ cat /proc/mdstat
Personalities : [raid6] [raid5] [raid4]
md0 : active raid5 sda1[0] sdf1[5] sde1[4] sdd1[3] sdc1[2] sdb1[1]
1562842880 blocks level 5, 256k chunk, algorithm 2 [6/6] [UUUUUU]
[>....................] check = 0.8% (2518144/312568576)
finish=2298.3min speed=2246K/sec
unused devices: <none>
which is an order of magnitude slower (the speed is per-disk, call it 13MB/s
for the six). There is no activity on the RAID. Is this expected? I assume
that the simple dd does the same amount of work (don't we check parity on
read?).
I have these tweaked at bootup:
echo 4096 >/sys/block/md0/md/stripe_cache_size
blockdev --setra 32768 /dev/md0
Changing the above parameters seems to not have a significant effect.
The check logs the following:
md: data-check of RAID array md0
md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec)
for data-check.
md: using 128k window, over a total of 312568576 blocks.
Does it need a larger window (whatever a window is)? If so, can it
be set dynamically?
TIA
--
Eyal Lebedinsky ([EMAIL PROTECTED]) <http://samba.org/eyal/>
attach .zip as .dat
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
As you add disks onto the PCI bus it will get slower. For 6 disks you
should get faster than 2MB/s however..
You can try increasing the min speed of the raid rebuild.
Justin.
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
