On Tuesday February 20, [EMAIL PROTECTED] wrote: > On 2/20/07, Neil Brown <[EMAIL PROTECTED]> wrote: > > > It says that the device (md0) is in delta 4->5, but I'm unable to get > > > it to restart reshaping. Are all the data I had on the raid-device > > > lost? Or is it possible to make it restart where it left off? It > > > clearly knows how far it has come along, since I get some stats about > > > that. > > Hmm... it should "just work", and it my testing it does. > > What should "kick off" the rebuild/reshape-process once it has been > interrupted?
When the array is started, it notices the reshape is incomplete and kick-starts the reshape. > > > The reshape process regularly checkpoints its progress so it knows > > where to start off from, and when you assemble the array again, it > > should restart the reshape. > > Ok, no matter if it's a different system assembling the drives? The > kernel is not running the md-device (if there is one?) from > mdadm-2.6-source, it's running the one inside 2.6.17. No, it doesn't matter if it is a different system, as long as the kernel is new enough to understand reshaping (and i think 2.6.17 is the earliest that understands it properly). > > > Can you post kernel log messages showing md0 being assembled? Also > > the output of "mdadm -E" on a couple of drives might be helpful. > > Running assemble: > # ./mdadm --assemble --scan > mdadm: failed to RUN_ARRAY /dev/.static/dev/md0: Invalid argument > > Ouput from syslog: > Feb 20 20:20:09 ubuntu kernel: [17197083.928000] md: md0 stopped. > Feb 20 20:20:09 ubuntu kernel: [17197084.012000] md: bind<sdd1> > Feb 20 20:20:09 ubuntu kernel: [17197084.012000] md: bind<sde1> > Feb 20 20:20:09 ubuntu kernel: [17197084.012000] md: bind<sdf1> > Feb 20 20:20:09 ubuntu kernel: [17197084.012000] md: bind<sdg1> > Feb 20 20:20:09 ubuntu kernel: [17197084.016000] md: bind<sdc1> Is that all.... Could it be that the kernel you are now using was not compiled with CONFIG_MD_RAID5_RESHAPE=y that would explain an error with no message. In fact it is the only thing that would explain the messages you got. So please try with a kernel that has RAID5_RESHAPE enabled. Thanks, NeilBrown - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
