On 3/16/07, Benjamin Herrenschmidt <[EMAIL PROTECTED]> wrote:
> + PRINTK("\tfree slot %x: %d stride: %d\n", desc->phys, desc->idx,
desc->stride);
Why don't you use the kernel existing debugging facilitie, like
pr_debug, or dev_dbg if you have a proper struct device (which you
should have with an arch/powerpc port hopefully using
of_platform_device).
This came from the the iop-adma driver. I blindly copied it from
drivers/md/raid5.c, but yes it should change to dev_dbg.
> + spin_lock_bh(&spe_chan->lock);
> + /* Allocate descriptor slots */
> + i = spe_chan->slots_allocated;
> + if (spe_chan->device->id != PPC440SPE_XOR_ID)
> + db_sz = sizeof (dma_cdb_t);
> + else
> + db_sz = sizeof (xor_cb_t);
> +
> + for (; i < (plat_data->pool_size/db_sz); i++) {
> + slot = kzalloc(sizeof(struct spe_adma_desc_slot), GFP_KERNEL);
GFP_KERNEL within spin_lock_bh is no good...
This is an iop-adma wart... will fix.
> diff --git a/include/asm-ppc/adma.h b/include/asm-ppc/adma.h
> new file mode 100644
> index 0000000..0be88f1
> --- /dev/null
> +++ b/include/asm-ppc/adma.h
There's way too many code in this .h file, too big inline functions. It
should mostly be moved to a .c file
The iop-adma driver uses separate .h files because the driver is
shared between iop3xx and iop13xx implementations and I did not want
the overhead of another indirect-branch layer. In this case the
hardware specific routines can be written inline since the driver is
only supporting one architecture... other suggestions?
Cheers,
Ben.
Regards,
Dan
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
