Bootet today, got this in dmesg:
[ 44.884915] md: bind<sdd1>
[ 44.885150] md: bind<sda1>
[ 44.885352] md: bind<sdb1>
[ 44.885552] md: bind<sdc1>
[ 44.885601] md: kicking non-fresh sdd1 from array!
[ 44.885637] md: unbind<sdd1>
[ 44.885671] md: export_rdev(sdd1)
[ 44.900824] raid5: device sdc1 operational as raid disk 1
[ 44.900860] raid5: device sdb1 operational as raid disk 3
[ 44.900895] raid5: device sda1 operational as raid disk 2
[ 44.901207] raid5: allocated 4203kB for md0
[ 44.901241] raid5: raid level 5 set md0 active with 3 out of 4 devices,
algorithm 2
[ 44.901284] RAID5 conf printout:
[ 44.901317] --- rd:4 wd:3
[ 44.901349] disk 1, o:1, dev:sdc1
[ 44.901381] disk 2, o:1, dev:sda1
[ 44.901414] disk 3, o:1, dev:sdb1
Checked the disk, seemed fine (not the first time linux kicked a disk for no
apparent reason), readded it with mdadm which triggered a resync.
Now having a look at it I get:
$ cat /proc/mdstat
Personalities : [raid6] [raid5] [raid4]
md0 : active raid5 sdd[4] sdc1[1] sdb1[3] sda1[2]
732563712 blocks level 5, 32k chunk, algorithm 2 [4/3] [_UUU]
[=>...................] recovery = 8.1% (19867520/244187904)
finish=1661.6min speed=2248K/sec
1661 minutes is *way* too long. it's a 4x250GiB sATA array and usually takes 3
hours to resync or check, for that matter.
So, what's this?
--
-----BEGIN GEEK CODE BLOCK-----
Version: 3.12
GCS d--(+)@ s-:+ a- C++++ UL++ P+>++ L+++>++++ E-- W++ N o? K-
w--(---) !O M+ V- PS+ PE Y++ PGP t++(---)@ 5 X+(++) R+(++) tv--(+)@
b++(+++) DI+++ D- G++ e* h>++ r* y?
------END GEEK CODE BLOCK------
http://www.stop1984.com
http://www.againsttcpa.com
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
