On Thu, 2007-10-18 at 18:33 +0200, BERTRAND Joël wrote: > Ming Zhang wrote: > > On Thu, 2007-10-18 at 11:33 -0400, Ross S. W. Walker wrote: > >> BERTRAND Joël wrote: > >>> BERTRAND Joël wrote: > >>>> BERTRAND Joël wrote: > >>>>> Hello, > >>>>> > >>>>> When I try to create a raid1 volume over iscsi, process > >>> aborts with : > >>>>> - on target side: > >>>>> > >>>>> iscsi_trgt: cmnd_abort(1156) 29 1 0 42 57344 0 0 > >>>>> iscsi_trgt: Abort Task (01) issued on tid:1 lun:0 by > >>> sid:630024457682948 > >>>>> (Unknown Task) > >>>> Next run: > >>>> iscsi_trgt: cmnd_abort(1156) 13 1 0 42 57344 0 0 > >>>> iscsi_trgt: Abort Task (01) issued on tid:1 lun:0 by > >>> sid:630058817421315 > >>>> (Unknown Task) > >>>> > >>>> You can see that both lines are very similar. I shall > >>> try to use > >>>> blockio instead fileio. > >>> With blockio, I got the following message... > >>> > >>> iscsi_trgt: cmnd_abort(1156) c 1 0 42 8192 0 0 > >>> iscsi_trgt: Abort Task (01) issued on tid:1 lun:0 by > >>> sid:630024457682946 > >>> (Unknown Task) > >>> > >>> Command is the same. What is the signification of 1156 ? > >> Both outputs are from the same Abort Task management function > >> the 1156 refers to the line in iscsi.c where the debug printf > >> was issued. > >> > >> The other is the more verbose informative message that says > >> an Abort Task command was issued, but the task was not found. > > > > pure guess, this might because the sparc64 you are using. > > > > could you export a NULLIO target and do some intensive io tests? sort > > out these platform issues first... > > I can format serveral times (mkfs.ext3) a 1.5 TB volume over iSCSI > without any trouble. I can read and write on this virtual disk without > any trouble. > > Now, I have configured ietd with : > > Lun 0 Sectors=1464725758,Type=nullio > > and I run on initiator side : > > Root gershwin:[/dev] > dd if=/dev/zero of=/dev/sdj bs=8192 > 479482+0 records in > 479482+0 records out > 3927916544 bytes (3.9 GB) copied, 153.222 seconds, 25.6 MB/s
25MB/s over a NULLIO is a very slow result... > > Root gershwin:[/dev] > dd if=/dev/zero of=/dev/sdj bs=8192 > > I'm waitinfor a crash. No one when I write these lines. I suspect an > interaction between raid and iscsi. > > Regards, > > JKB -- Ming Zhang @#$%^ purging memory... (*!% http://blackmagic02881.wordpress.com/ http://www.linkedin.com/in/blackmagic02881 -------------------------------------------- - To unsubscribe from this list: send the line "unsubscribe linux-raid" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html
