On Tue, 23 Oct 2007, Richard Scobie wrote:
Peter wrote:
Thanks Justin, good to hear about some real world experience.
Hi Peter,
I recently built a 3 drive RAID5 using the onboard SATA controllers on an
MCP55 based board and get around 115MB/s write and 141MB/s read.
A fourth drive was added some time later and after growing the array and
filesystem (XFS), saw 160MB/s write and 178MB/s read, with the array 60%
full.
Regards,
Richard
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Yes, your chipset must be PCI-e based and not PCI.
Justin.
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
