----- Message from [EMAIL PROTECTED] ---------
Date: Wed, 26 Dec 2007 21:22:42 -0800
From: Cody Yellan <[EMAIL PROTECTED]>
I had a 4x500GB SATA2 array, md0. I added one 500GB drive and
reshaping began at ~2500K/sec. Changing
/proc/sys/dev/raid/speed_limit_m{in,ax} or
/sys/block/md0/md/sync_speed_m{in,ax} had no effect. I shut down all
unnecessary services and the array is offline (not mounted). I have
read that the throttling code is "fragile" (esp. with regard to
raid5) but does this make sense? I will wait (in)patiently for it to
finish, but I do wonder why the configuration parameters have no
effect. This is a dual quad 2GHz Xeon machine with 8GB of memory
running RHEL5. Is this the maximum speed?
----- End message from [EMAIL PROTECTED] -----Certainly not. I've personally used a similar setup with >80MB/s reshape speeds.
There must be some other limiting factor.Try simultanous dd's from the drives, if that doesn't work as fast as it should there might be some bus contention?
======================================================================== # _ __ _ __ http://www.nagilum.org/ \n icq://69646724 # # / |/ /__ ____ _(_) /_ ____ _ [EMAIL PROTECTED] \n +491776461165 # # / / _ `/ _ `/ / / // / ' \ Amiga (68k/PPC): AOS/NetBSD/Linux # # /_/|_/\_,_/\_, /_/_/\_,_/_/_/_/ Mac (PPC): MacOS-X / NetBSD /Linux # # /___/ x86: FreeBSD/Linux/Solaris/Win2k ARM9: EPOC EV6 # ======================================================================== ---------------------------------------------------------------- cakebox.homeunix.net - all the machine one needs..
pgpGdSdi200h6.pgp
Description: PGP Digital Signature
