Neil Brown wrote:
On Tuesday February 5, [EMAIL PROTECTED] wrote:
% mdadm --zero-superblock /dev/sdb1
mdadm: Couldn't open /dev/sdb1 for write - not zeroing
That's weird.
Why can't it open it?
I suspect that (a) he's not root and has read-only access to the device
(I have group read for certain groups, too). And since he had the arrays
on raw devices, shouldn't he zero the superblocks using the whole device
as well? Depending on what type of superblock it might not be found
otherwise.
It sure can't hurt to zero all the superblocks of the whole devices and
then check the partitions to see if they are present, then create the
array again with --force and be really sure the superblock is present
and sane.
Maybe you aren't running as root (The '%' prompt is suspicious).
Maybe the kernel has been told to forget about the partitions of
/dev/sdb.
mdadm will sometimes tell it to do that, but only if you try to
assemble arrays out of whole components.
If that is the problem, then
blockdev --rereadpt /dev/sdb
will fix it.
NeilBrown
--
Bill Davidsen <[EMAIL PROTECTED]>
"Woe unto the statesman who makes war without a reason that will still
be valid when the war is over..." Otto von Bismark
-
To unsubscribe from this list: send the line "unsubscribe linux-raid" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
