Hello all,
We are planning on using RAID-1 to mirror two identical drives.
The drives are set up the same in bios, CHS mode with 25228
cylinders, 16 heads, ande 63 sectors each. Linux sees them and shows
the same setup as the bios. Linux fdisk on the other hand, shows
different setups for the drives. One(hdb) has 1582 cylinders and 255
heads, while the other(hdc) has 25228 cylinders and 16 heads. We
were wondering if this was a problem that would be preventative to
implementing RAID-1 mirroring, and if so how we can set things right.
Thanks,
Chris
*********************************************************************
Chris Brown [EMAIL PROTECTED] !!! HELP FIGHT SPAM !!!
Join; www.cauce.org See; spam.abuse.net, spamsucks.com, www.cm.org
****************************************************************
