Hello everyone,
Thanks for the responses about our CHS problems. We've decided
to get the drives mirrored before we go mucking around with the CHS
settings, but we can't get RAID to load up our new drive.
We did it before by using the command "mkraid -f --only-
superblock", but that command was outdated with version 0.90 of
raidtools. We tried "mkraid --upgrade /dev/md0" but all that does is
check /dev/hdb1's superblock. All the documentation we read points
to the command "ckraid", which is also outdated now.
Please, does anybody know how to add the device?
Thanks,
Chris
Here is our /etc/raidtab just in case it might help:
# sample raiddev configuration file
raiddev /dev/md0
raid-level 1
nr-raid-disks 2
nr-spare-disks 0
chunk-size 16
device /dev/hdb1
raid-disk 0
device /dev/hdc1
raid-disk 1
*********************************************************************
Chris Brown [EMAIL PROTECTED] !!! HELP FIGHT SPAM !!!
Join; www.cauce.org See; spam.abuse.net, spamsucks.com, www.cm.org
****************************************************************
