Hi, Does it work? - or do you have problems with the raid? When it works - where is the problem???? Thomas > i try to make 2 raid0's > > mkraid /dev/md0 > mkraid /dev/md0 > > mke2fs /dev/md0 > > > [root@storage /root]# cat /proc/mdstat > Personalities : [raid0] > read_ahead 1024 sectors > md1 : active raid0 hdg1[1] hde1[0] 49981568 blocks 32k chunks > md0 : active raid0 hdc1[1] hda1[0] 49981568 blocks 32k chunks > > > but then i reboot > > and try to start raid : > > [root@storage /root]# raidstart /dev/md0 > (read) hda1's sb offset: 24990720 [events: 00000034] > (read) hde1's sb offset: 24990720 [events: 00000034] > (read) hdg1's sb offset: 24990720 [events: 00000034] > (read) hdc1's sb offset: 24990720 [events: 00000034] > autorun ... > considering hdc1 ... > adding hdc1 ... > adding hdg1 ... > adding hde1 ... > adding hda1 ... > <...> > > eh ? > why does it first try hdc1 ? > and then add g1,e1 and a1 ? > > this is my /etc/raidtab : > > raiddev /dev/md0 > raid-level 0 > persistent-superblock 0 > chunk-size 32 > nr-raid-disks 2 > device /dev/hda1 > raid-disk 0 > device /dev/hdc1 > raid-disk 1 > > raiddev /dev/md1 > raid-level 0 > persistent-superblock 0 > chunk-size 32 > nr-raid-disks 2 > device /dev/hde1 > raid-disk 0 > device /dev/hdg1 > raid-disk 1 > > > -- Sent through Global Message Exchange - http://www.gmx.net
