I have two PCI SCSI Controller cards. One Adaptec 2940U2W and a 2930
Adaptec. The drives hooked to the U2W all work fine. However, the drive I
have hooked up to the 2930 is not ever assigned a drive label such as sdx.
I can use the SCSI Utility to format the drive on boot up but it still is
not seen later to partition. Any ideas?
Thanks in advance,
Pat
---------------------------------------------------
Patrick Heath
Network Administrator
Fred Hutchinson Cancer Research Center
1100 Fairview Avenue North, A1-162
Seattle, WA 98109
Email: [EMAIL PROTECTED]
Phone: (206) 667-2000
Fax: (206) 667-6525
---------------------------------------------------
