Is this list active? If so, I have a question
Running 2.2.13 with patches for the HPT366 IDE controller.
raidtools-0.90
AHA2940, 2 411 MB SCSI drives, sda and sdb. I've made a single
partition on each, not yet formatted. I'm trying to create RAID0.
My /etc/raidtab is:
# Sample raid-0 configuration
raiddev /dev/md0
raid-level 0 # it's not obvious but this *must* be
# right after raiddev
persistent-superblock 0 # set this to 1 if you want autostart,
# BUT SETTING TO 1 WILL DESTROY PREVIOUS
# CONTENTS if this is a RAID0 array created
# by older raidtools (0.40-0.51) or
mdtools!
chunk-size 16
nr-raid-disks 2
nr-spare-disks 0
device /dev/sda1
raid-disk 0
device /dev/sdb1
raid-disk 1
Totally standard, I think. When I run "mkraid /dev/md0" I get:
handling MD device /dev/md0
analyzing super-block
disk 0: /dev/sda1, 420848kB, raid superblock at 420736kB
disk 1: /dev/sdb1, 420848kB, raid superblock at 420736kB
mkraid: aborted
What does this mean? Thanks in advance.
--
Edward Schernau http://www.schernau.com
Network Architect mailto:[EMAIL PROTECTED]
Rational Computing Providence, RI, USA, Earth
