BTW- The 'lilo' and kernel with comes with the VA-Linux distro for
their hardware (based on RH6.2) seems to have the current patches and
worked flawlessly for me. Maybe you can grab the SRPM's for those?
Phil
On Fri, Jun 09, 2000 at 10:49:19AM -0800, Michael wrote:
> > > > get the latest lilo from metalab, it understands raid
> > >
> > > But it does not really work.
> > > If I do a lilo with boot=/dev/md0 in my lilo.conf it does write to both
> > > disks. But booting from the second disk in the array is not possible.
> > > I always get "error: 0x80" or similar right after the LILO prompt.
> >
> > I get the same error; it actually accesses my floppy drive and I
> > have no idea why. Are your drives IDE drives with more than 10 gigs?
> >
>
> So do it with regular LILO, it works fine and allows for differing
> disk geometrys
>
> See the Boot+Root+Raid+LILO howto at the Linux Documentation Project
> (metalab)
--
Philip Edelbrock -- IS Manager -- Edge Design, Corvallis, OR
[EMAIL PROTECTED] -- http://www.netroedge.com/~phil
PGP F16: 01 D2 FD 01 B5 46 F4 F0 3A 8B 9D 7E 14 7F FB 7A
